Brake Fluid Flush cost in Warwick in 2023

The average cost for a brake flush is $71 and the range is generally between $15 and $101.

Save 10-40% on your vehicle maintenance and repair. We can guarantee that any service you book through us will cost you less than any retail price you can find.

Not the right city? Click here

Our data is sourced from over 100,000 repairs and thousand of different repair shops, and reviewed by our ASE certified editorial team.


Brake Fluid Flush costs by shop in Warwick.

CarAdvise Customers save an average of $14 on Brake Fluid Flush.


Average cost of Brake Fluid Flush for popular vehicle models in Warwick:


What is a brake fluid flush and how is it done?

The brake system on your vehicle is a hydraulic system consisting of a pump (the master cylinder), a network of tubing that runs along the underbody to each wheel (the brake lines), a pair of brake pads or shoes that create friction when forced against a spinning metal object, and the disc (rotor) or drum against which the pads are squeezed or pressed. The hydraulics are engaged whenever you press on the brake pedal and actuate the master cylinder. The master cylinder, in turn, pumps or puts pressure on the hydraulic oil known as brake fluid that is used to slow and stop your vehicle. Over time, the brake fluid in the system degrades and needs to be replaced. The most complete way to replace the fluid is with a fluid flush service.


What are the signs that a vehicle needs a brake fluid flush?

Brake fluid is hygroscopic, meaning it readily absorbs moisture, and should be changed periodically as part of routine vehicle maintenance. Certain driving conditions can cause your brake fluid to need replacement sooner than might be recommended by the manufacturer. Signs that your brake fluid needs to be replaced include:

The fluid in the master cylinder reservoir appears dirty or discolored, brown or black rather than nearly clear with a yellow tint, or it contains foreign particles

The fluid level in the master cylinder is low, indicating a possible leak that could introduce moisture into the system and contaminate the brake fluid

Your brake pedal feels soft or spongy and the vehicle is difficult to stop

A warning light on the dashboard comes on, either a brake warning light or Check Engine Light


How does a technician perform Brake Fluid Flush ?

There are two methods to replace brake fluid in a vehicle, bleeding and flushing. Bleeding the brakes involves manually pumping fluid through the brake lines using the brake pedal or allowing gravity to pull brake fluid from the lines. A brake fluid flush involves the use of a power flushing machine that thoroughly removes all of the old brake fluid from the system and replaces it with new fluid without introducing any air into the lines. This is especially helpful for the majority of vehicles that feature antilock brake systems. To perform a brake fluid flush, a mechanic will typically do the following:

  • Connect power brake flush machine to the master cylinder
  • Open each of the caliper (or wheel cylinder) bleeder screws to allow fluid to escape the system
  • Take care to capture the old brake fluid
  • Pressurize the brake flush machine and system to force out the old fluid and inject the new fluid
  • Close bleeder screws and disconnect the machine when procedure is complete
  • Top off fluid level as necessary
  • Test brake system to verify that no leaks exist


Is a brake fluid flush necessary?
The brakes are perhaps the most important safety feature on your vehicle. Ensuring that the hydraulic brake fluid at the core of the system is essential to safe braking, and the way to do that most effectively and efficiently is to schedule for a brake fluid flush service.
Can I do a brake fluid flush myself?
If you are mechanically inclined and have the proper tools and training, you might be able to perform something of a fluid change by bleeding the brakes. However, brake bleeding is not nearly as complete a process as a fluid flush as it does not replace all of the brake fluid in the system. Besides, you cannot perform a brake fluid flush unless you have access to a power flush machine designed for that purpose.
How long does a brake fluid flush take?
It should only take about fifteen to thirty minutes or so for an experienced mechanic using a power flush machine to perform this service. That is significantly less time than it might take to bleed the brakes manually using a two-person method, and especially using gravity to bleed the brakes. A fluid flush is also more thorough that bleeding the brakes.

We help you search, schedule, and save on your car’s maintenance and repair.

With CarAdvise, you can save 10-40% on your vehicle maintenance and repair.

Partner with trusted auto repair shops like Firestone, Pep Boys and Jiffylube offering CarAdvise at over 26,000 shops nationwide:

Trusted by over 1 Million users

When you book with CarAdvise, get access to our ASE trained techs to answer any questions you have about your repair.

We help you save money

We guarantee that any service you book through us will cost you less than any retail price you can find.

We guarantee our work

12 Month, 12,000 Mile Warranty on every service booked through CarAdvise.