A Brake Shoe Replacement costs by shop in Binghamton.
CarAdvise Customers save an average of $0 on A Brake Shoe Replacement.
Average cost of A Brake Shoe Replacement for popular vehicle models in Binghamton:
Chevrolet Silverado 1500
Avg. cost $113
Ford Transit Connect
Avg. cost $92
Avg. cost $87
THE IMPORTANCE OF A Brake Shoe Replacement
What are brake shoes and how do they work?
Brake shoes are components of a drum brake system on a vehicle. Many older makes and models featured drum brakes, especially on the rear wheels. Although they have largely taken a backseat to disc brake systems, drum brakes can still be found on a number of late model cars and trucks. Drum brakes work differently than a disc brake system, where a thick, heavy metal disc (the rotor) attached to each wheel is grabbed by a pair of brake pads from the outside, causing the wheel to slow and stop. With drum brakes, there is a steel drum, much like a deep bowl, with a pair of brake shoes suspended inside. When you press on the brake pedal, the brake shoes expand outward, rubbing against the inside of the drum. This action produces friction to slow and stop your vehicle.
Signs that my brake shoes need to be replaced
Brake shoes, like brake pads in a disc brake system, contain friction materials that are designed to wear away over time. This arrangement allows for contact between the shoes (or pads) and the drum (or rotor) without causing excessive heat and damaging metal-to-metal contact. However, when the friction material wears too thin, the metal backing plates of the brake shoes can contact the inside of the drum and cause significant damage. Therefore, it is important to recognize the signs of brake shoes that are nearing time for replacement. Symptoms include:
Loss of braking power or increased stopping distances
You hear scraping, squeaking, or grinding noises
The brake shoe warning indicator comes on
Your brake warning light comes on
This text is only for demo
FREQUENCY OF INSPECTION
How does a technician perform A Brake Shoe Replacement ?
Unlike a disc brake system, where the brake pads are readily accessible once the brake caliper is removed, drum brakes include a system of springs, retainers, adjusters, and other components to actuate the brake shoes. So, with your vehicle safely lifted and supported off of the ground and the wheels removed, a mechanic will need to do the following to access and replace your brake shoes:
Remove the brake drum and replace or resurface the drum (Note, some brake drums require that the axle nut be removed first)
Remove the primary retaining spring(s)
Remove each of the spring-tensioned brake shoe retainers
Remove the brake shoes from their mounting location
Disconnect the parking brake cable end
Inspect the wheel cylinder for signs of leaks
Reset the brake tensioner
Install in reverse order, paying attention to match the brake shoes and hardware
Reinstall the brake drum and adjust the tensioner
Top off brake fluid as necessary
Actuate parking brake for further tensioner adjustment
Test drive to verify repair
OTHER QUESTIONS CUSTOMERS ASK
Can I replace just the brake shoes?
Brake shoes are designed to wear out over time, brake drums are not. They should last much longer. However, it is not uncommon for a brake drum to need replacement. When that is the case, if you replace only the brake shoes, the damaged or worn drum will reduce both the lifespan and the stopping power of your new brake shoes. At the very least, the brake drums should be resurfaced every time you have the brake shoes replaced. The hardware should also be inspected, cleaned, and, if necessary, replaced at the same time.
What happens if you don’t replace brake shoes?
Because of the sacrificial nature of brake shoes (and pads), they will wear out over time and with use. If you do not pay attention to the signs of worn brake shoes, the result will be reduced stopping power, longer stopping distances, and eventually damaging metal-to-metal contact between the brake shoe backing plates and the inside of the brake drum.
What is the difference between brake pads and brake shoes?
Brake pads and brake shoes are similar components of a vehicle’s braking system. They both feature sacrificial friction materials that wear away with use. But whereas brake pads that are part of a disc brake system are sandwiched around the outside of a brake rotor and squeeze inward, brake shoes, part of a drum brake system, are suspended inside a brake drum and expand outward.
This is demo Question
This is demo Answer
Compare discounted prices upfront at over 26,000 shops nationwide.
Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.
Our digital platform is designed to make maintaining and repairing your vehicle a breeze – from conveniently scheduling services, finding shops in the area, approving work remotely or getting free expert advice so you can be confident about any decision.
How much does CarAdvise cost?
There’s nothing to pay up-front; you simply only pay for repairs or services that you approve.
Are there any additional fees?
Nope, no funny business here—just get the job done and pay for what you approve. It really is that simple.
Are there shops available in my area?
With our handy nationwide network of over 26,000 shops to choose from and free sign-up – you can rest assured your car is in good hands.
How does CarAdvise pricing work?
With CarAdvise, you don’t need a fleet of 100,000 cars to get an amazing deal on car services. Our discounted prices are guaranteed to beat any other retail options – so why spend more? On average customers save 15-40% when they choose us – that could mean hundreds saved in just one service job.
At CarAdvise, we believe life is unpredictable and if you need to reschedule or cancel an appointment – no worries! We promise there’s never any penalty for missed appointments.
What shops do you work with?
We’ve partnered with the best in the industry such as Firestone, Pep Boys, JiffyLube, Canadian Tire, NTB, Meineke, Tire Kingdom, AAMCO, Monro, FCA dealerships and many independent shops across the country.
How do I sign up?
Ready to join the party? Just a few clicks and you’ll be all set – create your account now. You can easily create your account here.
How do I get more help?
Just email us at [email protected] or give our friendly team a ring at (844) 923-8473 and we’ll be sure to lend you the helping hand you need.