Camshaft Seal Replacement cost in Smyrna in 2023

The average cost for a camshaft seal replacement is $159 and the range is generally between $92 and $537.

Save 10-40% on your vehicle maintenance and repair. We can guarantee that any service you book through us will cost you less than any retail price you can find.

Not the right city? Click here

Our data is sourced from over 100,000 repairs and thousand of different repair shops, and reviewed by our ASE certified editorial team.

AVERAGE COST IN Smyrna

Camshaft Seal Replacement costs by shop in Smyrna.

CarAdvise Customers save an average of $32 on Camshaft Seal Replacement.

POPULAR VEHICLES

Average cost of Camshaft Seal Replacement for popular vehicle models in Smyrna:

Car Model

Avg. cost

$50

THE IMPORTANCE OF Camshaft Seal Replacement

What is a camshaft seal and how does it work?

A camshaft seal is a component of the valvetrain in your engine. It provides a seal around the end of the camshaft to prevent oil from leaking out.

he camshaft in an engine serves to open and close all of the intake and exhaust valves that allow air and fuel to enter the combustion chambers and exhaust gases to escape. Most modern engines position the camshaft(s) at the top, inside of the cylinder head(s). An engine can have anywhere from one to four camshafts that actuate as many as thirty two valves. And all of those components rely on engine oil for lubrication.

But a camshaft is driven to rotate by the timing belt or timing chain. In order for that to happen, the camshaft must protrude through the front wall of the cylinder head (or engine block, in the case of some older engines) to the compartment where the timing belt or chain is located. The camshaft seal is what keeps engine oil inside the cylinder head.

COMMON SYMPTOMS

How do I know if my vehicle needs a new camshaft seal?

The camshaft seal fulfills one purpose, to prevent oil from leaking from the cylinder head around the camshaft. If oil escapes through the camshaft seal, it needs to be replaced.

If an oil leak from the camshaft seal is significant, you might notice a puddle of oil on the ground beneath the front of your engine (the passenger side in most front-wheel-drive vehicles). You might also notice oil leaking from the bottom of the timing cover near the serpentine drive belt on your engine, but only if your engine has a timing belt. That is because the timing cover on an engine with a timing chain is sealed as well. Therefore, a leak from the camshaft seal would not be evident from the timing cover. In fact, an engine with a timing chain might not even have a camshaft seal.

This text is only for demo

FREQUENCY OF INSPECTION

How does a technician perform Camshaft Seal Replacement ?

One of the reasons that a camshaft seal is usually replaced along with the timing belt and other timing components is because it is a labor intensive procedure that requires a good deal of tools and training. To replace the camshaft seal, a technician needs to gain access to the front of the engine. This usually requires safely lifting and supporting the vehicle off of the ground, removing shields, guards, covers, ducts and the serpentine drive belt. The radiator might also need to be removed, depending on the orientation of your engine.

With those items out of the way, a typical camshaft seal replacement (the procedure differs from one vehicle make and model to the next) involves the following general steps:



  • Remove the water pump (on some models)
  • Detach the drive pulley on the crankshaft
  • Remove any engine accessories (AC compressor, alternator, power steering pump, etc.) that are in the way of the timing belt cover
  • Remove the valve cover(s)
  • Unbolt and remove the timing cover from the front of the engine
  • Synchronize the timing marks on the camshaft and crankshaft pulleys and align to top dead center
  • Remove the timing belt tensioner pulley (s)
  • Dislodge the timing belt (or chain)
  • Remove the camshaft pulley (or sprocket)
  • Pull the camshaft seal from the cylinder head and press in a new one
  • Install the new belt, taking care to align to the timing marks
  • Install the timing belt tensioner pulleys and set belt tension
  • Reinstall all components and add fluids as necessary This abbreviated list of steps does not account for differences between engines, whether your has single or dual camshafts, the style of tensioners used, and other variables. It is common to replace not only the camshaft seal, but also the timing belt, tensioners, and even the pulleys on which the timing belt rides. If your engine has a water pump that is driven by the timing belt, that too will be recommended for replacement. The procedure is similar if your engine has a timing chain rather than a belt. If the procedure is not done properly, your engine could fail to run, run poorly, or suffer severe internal damage.

OTHER QUESTIONS CUSTOMERS ASK

How do you put a camshaft seal in?
To install a camshaft seal, the old seal must first be pulled from the cylinder head. A technician then presses the new seal into place, taking care to avoid damage to the new seal and the mounting surface of the cylinder head. But that is only part of the job. In order to access the camshaft seal, many other components must be removed, including sensitive timing elements, such as the timing belt, tensioner, and more.
Can you drive with a leaking camshaft seal?
You should not drive a vehicle for very long if the camshaft seal is leaking. Not only will your engine lose oil, but damage to the timing belt and other timing components can result. And if the timing belt fails, your engine could suffer major damage. A leaking camshaft seal can even lead to an engine fire in some circumstances.
Can I drive with a broken camshaft?
No, the engine should not even be started if it has a broken camshaft. If an engine with a broken camshaft is started or allowed to run for even a few seconds, other internal engine parts - the pistons, valves, or even another camshaft - can all suffer catastrophic (and costly) damage.

This is demo Question

This is demo Answer

Questions? We've got answers.

Our digital platform is designed to make maintaining and repairing your vehicle a breeze – from conveniently scheduling services, finding shops in the area, approving work remotely or getting free expert advice so you can be confident about any decision.

There’s nothing to pay up-front; you simply only pay for repairs or services that you approve. 

Nope, no funny business here—just get the job done and pay for what you approve. It really is that simple.

With our handy nationwide network of over 26,000 shops to choose from and free sign-up – you can rest assured your car is in good hands. 

With CarAdvise, you don’t need a fleet of 100,000 cars to get an amazing deal on car services. Our discounted prices are guaranteed to beat any other retail options – so why spend more? On average customers save 15-40% when they choose us – that could mean hundreds saved in just one service job.

Learn More

At CarAdvise, we believe life is unpredictable and if you need to reschedule or cancel an appointment – no worries! We promise there’s never any penalty for missed appointments.

We’ve partnered with the best in the industry such as Firestone, Pep Boys, JiffyLube, Canadian Tire, NTB, Meineke, Tire Kingdom, AAMCO, Monro, FCA dealerships and many independent shops across the country.

Ready to join the party? Just a few clicks and you’ll be all set – create your account now. You can easily create your account here.

Just email us at support@caradvise.com or give our friendly team a ring at (844) 923-8473 and we’ll be sure to lend you the helping hand you need.