A Canister Purge Valve Replacement cost in Elgin in 2023

The average cost for a canister purge control valve with CarAdvise is $151 and the range is generally between $71 and $342.

Get expert advice, find shops, schedule, approve, & pay for any service - guaranteed to be lower than in-store retail price.

Get your vehicle's inside scoop without the mumbo jumbo.

Lower than retail price

Guaranteed or 5% back

We've got your back

12k/12mo Warranty

Peace of mind

14-Day Assurance


A Canister Purge Valve Replacement costs by shop in Elgin.

CarAdvise Customers save an average of $30 on A Canister Purge Valve Replacement.


Average cost of A Canister Purge Valve Replacement for popular vehicle models in Elgin:

Car Model

Avg. cost


THE IMPORTANCE OF A Canister Purge Valve Replacement

What is a canister purge valve and how does it work?

A canister purge valve is part of the Evaporative Emission Control (EVAP) system of a vehicle. The EVAP system captures fuel vapors that evaporate from the fuel tank and reroutes them to be burned in the engine rather than be allowed to escape into the atmosphere. Fuel vapors that vent outside result not only in a loss of fuel, but also in emissions that are harmful to the environment and people.

Also known as a purge solenoid, the canister purge valve allows the fuel tank to be vented so that pressure does not build up inside. At the same time, it prevents those vapors from escaping. Vapors that are collected are stored in a special vapor canister where they are absorbed by activated carbon (charcoal) and stored there until the engine control module (ECM) signals the canister purge valve to open. Once the valve opens, the fumes stored in the canister are drawn out by the engine and burned as part of the combustion process.


How do I know if my vehicle needs a new canister purge valve?

A check engine light is a common sign that a canister purge valve has failed. A diagnostic scan of the vehicle will reveal a trouble code related to pressure in the EVAP system. Besides the check engine light and related trouble code, other possible symptoms include:

Difficulty starting your engine

A rough idle

Decreased fuel economy

A failed emissions test

This text is only for demo


How does a technician perform A Canister Purge Valve Replacement ?

To replace the canister purge valve, a technician will take the following general steps:

  • Disconnect the negative battery terminal, taking care to preserve the vehicle computer memory
  • Remove any shields, guards, covers, or ducts to gain access to the canister purge valve
  • Disconnect and remove the wiring from the valve
  • Disconnect any EVAP hoses attached to the component
  • Remove any screws or fasteners holding the device in place and remove it from the vehicle
  • Insert and fasten the new canister purge valve in place
  • Reconnect the hoses and wiring
  • Reinstall any shields, guards, covers, or ducts that were removed
  • Reconnect the battery terminal
  • Start the vehicle and verify the repair by using a scan-tool to test the EVAP system and cycle the EVAP canister purge valve


Can you drive with a faulty canister purge valve?
The results of driving with a faulty canister purge valve depend on which position the valve is in when it fails. If the purge valve fails in the closed position, you most likely won't notice driveability issues with your vehicle. But you might find that the check engine light comes on, and you might notice poor fuel mileage. If, on the other hand, the valve fails in the open position, your engine can run rough, stall, shake, be hard to start, and suffer from poor fuel economy.
What happens if the canister purge control valve fails?
The EVAP system feeds fuel vapors into the engine to be burned rather than be released into the atmosphere. Knowing this, the engine’s computer adjusts the air to fuel ratio to compensate for the addition of fuel. If the canister purge valve fails, an excess of fuel (or a decrease) will be present inside the combustion chambers, causing your engine to run either too rich or too lean. Either is problematic for your engine.
What causes canister purge valve failure?
Canister purge valve failure can be related to a mechanical failure of the device itself, or damaged, decayed, and dirty wires leading to the valve.

This is demo Question

This is demo Answer

Compare discounted prices upfront at over 26,000 shops nationwide.

Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.

+ More

Join the world's largest consumer fleet.

Over 1.5 Million already have.

Questions? We've got answers.

Our digital platform is designed to make maintaining and repairing your vehicle a breeze – from conveniently scheduling services, finding shops in the area, approving work remotely or getting free expert advice so you can be confident about any decision.

There’s nothing to pay up-front; you simply only pay for repairs or services that you approve. 

Nope, no funny business here—just get the job done and pay for what you approve. It really is that simple.

With our handy nationwide network of over 26,000 shops to choose from and free sign-up – you can rest assured your car is in good hands. 

With CarAdvise, you don’t need a fleet of 100,000 cars to get an amazing deal on car services. Our discounted prices are guaranteed to beat any other retail options – so why spend more? On average customers save 15-40% when they choose us – that could mean hundreds saved in just one service job.

Learn More

At CarAdvise, we believe life is unpredictable and if you need to reschedule or cancel an appointment – no worries! We promise there’s never any penalty for missed appointments.

We’ve partnered with the best in the industry such as Firestone, Pep Boys, JiffyLube, Canadian Tire, NTB, Meineke, Tire Kingdom, AAMCO, Monro, FCA dealerships and many independent shops across the country.

Ready to join the party? Just a few clicks and you’ll be all set – create your account now. You can easily create your account here.

Just email us at [email protected] or give our friendly team a ring at (844) 923-8473 and we’ll be sure to lend you the helping hand you need.