Clutch Disc Replacement cost in Bullhead City in 2023

Save 10-40% on your vehicle maintenance and repair. We can guarantee that any service you book through us will cost you less than any retail price you can find.

Not the right city? Click here

Our data is sourced from over 100,000 repairs and thousand of different repair shops, and reviewed by our ASE certified editorial team.

AVERAGE COST IN Bullhead City

Clutch Disc Replacement costs by shop in Bullhead City.

CarAdvise Customers save an average of $0 on Clutch Disc Replacement.

POPULAR VEHICLES

Average cost of Clutch Disc Replacement for popular vehicle models in Bullhead City:

THE IMPORTANCE OF Clutch Disc Replacement

What is a clutch disc and how does it work?

A clutch disc is a component of the clutch assembly in a manual transmission system. In order to effectively switch between gears in your manual transmission, it is necessary to momentarily disengage the transmission from the engine. Otherwise, your vehicle would be in motion anytime the engine was running. The clutch is the connection between the engine and the transmission and can be alternately engaged and disengaged.

The way the clutch works is through friction between the engine flywheel and the clutch disc. The flywheel is connected to the engine crankshaft and spins with the engine. The clutch disc is connected to the input shaft of the transmission. The disc is coated with a sacrificial friction material that causes it to grab hold of the surface of the flywheel when pressed against it by the clutch pressure plate. This is the case under normal operating conditions with the clutch engaged. Since the transmission input shaft is connected to the clutch disc, the shaft turns along with the engine.

When you press the clutch pedal, tension from the pressure plate is relieved, and the clutch disc is freed from the flywheel. In this condition, the engine spins independently of the transmission so that you can select a different gear.

COMMON SYMPTOMS

How do I know if my vehicle needs a new clutch disc?

There are several signs that your clutch assembly needs attention. When the clutch is serviced, it is common for a technician to replace all related components, including the pilot bearing, pressure plate, release bearing, and clutch disc. When these components wear out or fail, you might notice one or more of the following symptoms:

Your engine seems to “run away” or rev up when you press the accelerator pedal without an increase in vehicle speed

The clutch pedal is unusually easy to press

You experience difficulty shifting between gears or from neutral into a selected gear

You hear grinding noises when shifting gears

FREQUENCY OF INSPECTION

How does a technician perform Clutch Disc Replacement ?

Most technicians will advise that all of the components of a clutch assembly should be replaced at the same time. This is for a couple of reasons. First of all, the time that it takes to replace one of the components of a clutch is essentially the same for replacement of the entire assembly. It is also likely that, if one component is worn, the other components are in a similar condition. Therefore, it is common to replace the pressure plate, pilot bearing, and release bearing along with the clutch disc.

To replace a clutch disc, a technician must first safely lift and support your vehicle in the air for access. From there, a typical clutch assembly replacement consists of the following:



  • Removal of the driveshaft(s) and transfer case (if so equipped)
  • Removal of the clutch slave cylinder and/or clutch linkage
  • Unbolting and removing the transmission from the vehicle
  • Disassembly of the clutch assembly to remove and replace the clutch disc and other components
  • Reinstallation of the transmission, linkage, slave cylinder, and other components
  • In the case of a hydraulic clutch, the hydraulic fluid must be replaced and the system may need to be bled of any air in the fluid. Special alignment tools and procedures may also be required to properly reassemble and install the clutch assembly into the transmission.

OTHER QUESTIONS CUSTOMERS ASK

How does a clutch burn out?
Clutches burn out when they are overheated from improper use or abuse. If a vehicle is loaded beyond its GVWR or is pulling more than its rated towing capacity, or if the driver does not engage and disengage the clutch quickly enough (also called "riding the clutch") this can cause the clutch to overheat and burn out. Frequent stop-and-go driving can also be hard on the clutch assembly.
How many miles should a clutch last?
How long a clutch should last varies greatly based on the habits of the driver. Some drivers are able to get 100K miles or more out of a clutch. Others, however, may find that they need a new clutch every 20K-30K miles.
Can I replace a clutch myself?
The procedure to replace a clutch assembly is a lengthy and relatively complex process. Not only does it involve safely lifting and supporting your vehicle in the air for access, but it also requires removal of the transmission or transaxle from the vehicle to access the clutch assembly. This is not an operation that should be undertaken by anyone who does not have significant experience and should be done by a qualified technician.

Questions? We've got answers.

Our digital platform is designed to make maintaining and repairing your vehicle a breeze – from conveniently scheduling services, finding shops in the area, approving work remotely or getting free expert advice so you can be confident about any decision.

There’s nothing to pay up-front; you simply only pay for repairs or services that you approve. 

Nope, no funny business here—just get the job done and pay for what you approve. It really is that simple.

With our handy nationwide network of over 26,000 shops to choose from and free sign-up – you can rest assured your car is in good hands. 

With CarAdvise, you don’t need a fleet of 100,000 cars to get an amazing deal on car services. Our discounted prices are guaranteed to beat any other retail options – so why spend more? On average customers save 15-40% when they choose us – that could mean hundreds saved in just one service job.

Learn More

At CarAdvise, we believe life is unpredictable and if you need to reschedule or cancel an appointment – no worries! We promise there’s never any penalty for missed appointments.

We’ve partnered with the best in the industry such as Firestone, Pep Boys, JiffyLube, Canadian Tire, NTB, Meineke, Tire Kingdom, AAMCO, Monro, FCA dealerships and many independent shops across the country.

Ready to join the party? Just a few clicks and you’ll be all set – create your account now. You can easily create your account here.

Just email us at support@caradvise.com or give our friendly team a ring at (844) 923-8473 and we’ll be sure to lend you the helping hand you need.