A Clutch Master Cylinder Replacement cost in Oakland Park in 2024

The average cost for a clutch master cylinder replacement with CarAdvise is $427 and the range is generally between $291 and $598.

Get expert advice, find shops, schedule, approve, & pay for any service - guaranteed to be lower than in-store retail price.

Get your vehicle's inside scoop without the mumbo jumbo.

Lower than retail price

Guaranteed or 5% back

We've got your back

12k/12mo Warranty

Peace of mind

14-Day Assurance

AVERAGE COST IN Oakland Park

A Clutch Master Cylinder Replacement costs by shop in Oakland Park.

CarAdvise Customers save an average of $85 on A Clutch Master Cylinder Replacement.

POPULAR VEHICLES

Average cost of A Clutch Master Cylinder Replacement for popular vehicle models in Oakland Park:

Car Model

Avg. cost

$50

THE IMPORTANCE OF A Clutch Master Cylinder Replacement

What is a clutch master cylinder and how does it work?

A clutch master cylinder is a fluid pump used with a hydraulic clutch system in a vehicle with a manual transmission. It works in a similar fashion to a brake master cylinder.

When you press on the clutch pedal to disengage your manual transmission so you can shift gears, the clutch master cylinder forces fluid through a tube to a slave cylinder at the other end. Mounted on the transmission, the slave cylinder responds to input from the clutch pedal (by way of the master cylinder) to push on the clutch fork and disengage the clutch. When you release the pedal, the slave cylinder closes, engaging the clutch and forcing fluid back into the master cylinder.

COMMON SYMPTOMS

How do I know if my vehicle needs a new clutch master cylinder?

When a clutch master cylinder fails, one or more of the following signs may be evident:

The hydraulic fluid level is low

There is fluid leakage or moisture near the clutch master cylinder

The clutch pedal feels spongy

The pedal seems to have little or no effect on the clutch

This text is only for demo

FREQUENCY OF INSPECTION

How does a technician perform A Clutch Master Cylinder Replacement ?

The clutch master cylinder is located near the clutch pedal beneath the dashboard. To replace the component, a technician will need to access that area and may need to remove trim components. Other steps to replacing the clutch master cylinder include the following:

  • Using a fluid pump, remove all of the hydraulic fluid from the clutch master cylinder reservoir
  • Disconnect the hydraulic line from the master cylinder
  • Unplug any electrical connections to the master cylinder
  • Detach the master cylinder from the clutch pedal and remove the mounting fasteners
  • Remove the clutch master cylinder from the vehicle
  • Install the new component, reattach all lines and wiring
  • Install fresh fluid and bleed air from the system
  • Test drive your vehicle to verify the repair Note - the hydraulic fluid used in the clutch master cylinder is the same as is used in the braking system. To prevent damage, a technician must take care to avoid spilling any on the carpet, trim, or paint.

OTHER QUESTIONS CUSTOMERS ASK

What happens when a clutch master cylinder fails?
When a clutch master cylinder fails, one of several things can occur. The clutch pedal may become abnormally easy or difficult to press. You may have difficulty shifting from neutral into a gear, or difficulty shifting in and out of any gears. The short answer is, you may not be able to shift gears to drive your vehicle at all.
What causes clutch master cylinder failure?
Clutch master cylinder failure is typically caused by moisture buildup inside the master cylinder. Brake fluid naturally attracts water vapor and can lead to corrosion of the master cylinder from the inside out. Corrosion then leads to the piston sticking and/or not sealing properly, which causes leaks and loss of pressure and therefore failure of the clutch master cylinder.
Why does my clutch pedal go all the way to the floor?
If your clutch pedal is going all the way to the floor, you may have a clutch master cylinder that's low on fluid, has blown seals on the piston, or your vehicle may have a leak in the clutch hydraulic line. If, by chance, your vehicle has a mechanical clutch, then the mechanical linkage or clutch cable may be broken or may have come loose.

This is demo Question

This is demo Answer

Compare discounted prices upfront at over 26,000 shops nationwide.

Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.

+ More

Join the world's largest consumer fleet.

Over 1.5 Million already have.