A Clutch Pilot Bearing Replacement cost in Edmonds in 2023

The average cost for a clutch pilot bearing replacement with CarAdvise is $26 and the range is generally between $11 and $167.

Get expert advice, find shops, schedule, approve, & pay for any service - guaranteed to be lower than in-store retail price.

Get your vehicle's inside scoop without the mumbo jumbo.

Lower than retail price

Guaranteed or 5% back

We've got your back

12k/12mo Warranty

Peace of mind

14-Day Assurance

AVERAGE COST IN Edmonds

A Clutch Pilot Bearing Replacement costs by shop in Edmonds.

CarAdvise Customers save an average of $5 on A Clutch Pilot Bearing Replacement.

POPULAR VEHICLES

Average cost of A Clutch Pilot Bearing Replacement for popular vehicle models in Edmonds:

Car Model

Avg. cost

$50

THE IMPORTANCE OF A Clutch Pilot Bearing Replacement

What is a clutch pilot bearing and how does it work?

A clutch pilot bearing is a component of a manual transmission system. In order to switch gears in a manual transmission, it is necessary to momentarily disengage the transmission from the engine. That is the responsibility of the clutch. The clutch is located between the engine and the transmission and connects the engine crankshaft to the transmission input shaft. The clutch pilot bearing supports the transmission input shaft and allows it to spin freely of the engine when the clutch is disengaged.

COMMON SYMPTOMS

How do I know if my vehicle needs a new clutch pilot bearing?

A clutch pilot bearing is typically replaced whenever the clutch assembly is replaced. The bearing is self lubricated and sometimes runs dry, causing the needle bearing rollers inside the bearing to come apart. When this happens, the input shaft and clutch disc can wander and prevent the clutch from disengaging or allow the transmission to pop out of gear while driving. Still, even if the pilot bearing is intact, if your clutch needs replacement for other reasons, the bearing should be replaced as well. Other signs that it is time to replace the clutch assembly include:

A howling or grinding noise when the clutch pedal is pressed

Vibrations that are exaggerated when the clutch pedal is actuated

Your engine seems to “run away” or rev up when you press the accelerator pedal without an increase in vehicle speed

You experience difficulty shifting between gears or from neutral into a selected gear

This text is only for demo

FREQUENCY OF INSPECTION

How does a technician perform A Clutch Pilot Bearing Replacement ?

Most technicians will advise that all of the components of a clutch assembly should be replaced at the same time. This is for a couple of reasons. First, the time that it takes to replace one of the components is essentially the same for replacement of the entire assembly. It is also likely that, if one component is worn, the other components are in a similar condition. Therefore, it is common to replace the clutch disc, pressure plate, and release bearing along with the pilot bearing.

To replace a clutch pilot bearing, a technician must first safely lift and support your vehicle in the air for access. From there, a typical clutch assembly replacement consists of the following:



  • Removal of the driveshaft(s) and transfer case (if so equipped)
  • Removal of the clutch slave cylinder and/or clutch linkage
  • Unbolting and removing the transmission from the vehicle
  • Disassembly of the clutch assembly to remove and replace the pilot bearing and other components
  • Reinstallation of the transmission, linkage, slave cylinder, and other components
  • In the case of a hydraulic clutch, the hydraulic fluid must be replaced and the system may need to be bled of any air in the fluid. Special alignment tools and procedures may also be required to properly reassemble and install the clutch assembly into the transmission.

OTHER QUESTIONS CUSTOMERS ASK

Should you replace a pilot bearing when doing the clutch?
Due to the amount of time involved and the fact that the transmission must be removed in order to replace the clutch assembly, most technicians will recommend replacing all of the components of the clutch assembly - the clutch disc, pressure plate, release bearing, and pilot bearing - at the same time. Many clutch assembly kits include a new pilot bearing.
Can I drive with a worn pilot bearing?
While it may be possible to drive with a bad or worn clutch pilot bearing, sometimes for a long while, it is not advised that you do so. The clutch assembly is the connection between your engine and your manual transmission. The pilot bearing allows the crankshaft to spin independently of the transmission input shaft when the clutch is disengaged. It also keeps the shaft centered properly. If the bearing fails, your clutch will not work as it should and damage can occur to your transmission.
Is a pilot bearing and a throwout bearing the same?
The pilot bearing and the throwout bearing are both components in a clutch assembly, but they are not the same component. The pilot bearing connects the engine crankshaft and the transmission input shaft, allowing them to rotate independently of one another when the clutch is disengaged. The throwout bearing, more formally known as the “release bearing”, is used to help disengage the clutch.

This is demo Question

This is demo Answer

Compare discounted prices upfront at over 26,000 shops nationwide.

Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.

+ More

Join the world's largest consumer fleet.

Over 1.5 Million already have.

Questions? We've got answers.

Our digital platform is designed to make maintaining and repairing your vehicle a breeze – from conveniently scheduling services, finding shops in the area, approving work remotely or getting free expert advice so you can be confident about any decision.

There’s nothing to pay up-front; you simply only pay for repairs or services that you approve. 

Nope, no funny business here—just get the job done and pay for what you approve. It really is that simple.

With our handy nationwide network of over 26,000 shops to choose from and free sign-up – you can rest assured your car is in good hands. 

With CarAdvise, you don’t need a fleet of 100,000 cars to get an amazing deal on car services. Our discounted prices are guaranteed to beat any other retail options – so why spend more? On average customers save 15-40% when they choose us – that could mean hundreds saved in just one service job.

Learn More

At CarAdvise, we believe life is unpredictable and if you need to reschedule or cancel an appointment – no worries! We promise there’s never any penalty for missed appointments.

We’ve partnered with the best in the industry such as Firestone, Pep Boys, JiffyLube, Canadian Tire, NTB, Meineke, Tire Kingdom, AAMCO, Monro, FCA dealerships and many independent shops across the country.

Ready to join the party? Just a few clicks and you’ll be all set – create your account now. You can easily create your account here.

Just email us at [email protected] or give our friendly team a ring at (844) 923-8473 and we’ll be sure to lend you the helping hand you need.