A Clutch Pressure Plate Replacement cost in Carol Stream in 2023

The average cost for a clutch pressure plate replacement is $178

Get expert advice, find shops, schedule, approve, & pay for any service - guaranteed to be lower than in-store retail price.

Get your vehicle's inside scoop without the mumbo jumbo.

Lower than retail price

Guaranteed or 5% back

We've got your back

12k/12mo Warranty

Peace of mind

14-Day Assurance


A Clutch Pressure Plate Replacement costs by shop in Carol Stream.

CarAdvise Customers save an average of $36 on A Clutch Pressure Plate Replacement.


Average cost of A Clutch Pressure Plate Replacement for popular vehicle models in Carol Stream:

Car Model

Avg. cost


THE IMPORTANCE OF A Clutch Pressure Plate Replacement

What is a clutch pressure plate and how does it work?

A clutch pressure plate is a component of a manual transmission system. In order to switch gears in a manual transmission, it is necessary to momentarily disengage the transmission from the engine. That is the job of the clutch. The clutch has two main components - the clutch disc and the pressure plate.

The clutch pressure plate is a large circular steel plate that applies spring loaded pressure to the clutch disc, holding it against the flywheel during normal driving operation. When you press on the clutch pedal, the spring tension inside the pressure plate is overcome and the clutch disc spins freely. This disengages the transmission from the engine so that you can select a different gear.


How do I know if my vehicle needs a new clutch pressure plate?

There are several signs that your clutch assembly needs attention. When the clutch is serviced, it is common for a technician to replace all related components, including the disc, pilot bearing, release bearing, and pressure plate. When these components wear out or fail, you might notice one or more of the following symptoms:

Your engine seems to “run away” or rev up when you press the accelerator pedal without an increase in vehicle speed

The clutch pedal is unusually easy to press

You experience difficulty shifting between gears or from neutral into a selected gear

You hear grinding noises when shifting gears

This text is only for demo


How does a technician perform A Clutch Pressure Plate Replacement ?

To replace a clutch pressure plate, a technician must first safely lift and support your vehicle in the air for access. From there, a typical clutch assembly replacement consists of the following:

  • Removal of the driveshaft(s) and transfer case (if so equipped)
  • Removal of the clutch slave cylinder and/or clutch linkage
  • Unbolting and removing the transmission from the vehicle
  • Disassembly of the clutch assembly to remove and replace the pressure plate
  • Reinstallation of the transmission, linkage, slave cylinder, and other components In the case of a hydraulic clutch, the hydraulic fluid must be replaced and the system may need to be bled of any air in the fluid. Special alignment tools and procedures may also be required to properly reassemble and install the clutch assembly into the transmission.


When should I replace my clutch pressure plate?
The clutch pressure plate is part of the clutch assembly. Although the pressure plate can be replaced on its own, most technicians recommend replacing the entire clutch assembly at one time for two reasons. First, the time it takes to replace the pressure plate is no different than replacement of all standard clutch components. And when the pressure plate wears out, it is common for the other components to wear out at the same time.
What causes clutch pressure plate failure?
Clutch pressure plates often fail when the friction material on the clutch disc becomes significantly worn away. When this happens, the rivets in the disc begin to grind against the clutch pressure plate and score the surface. Clutch pressure plates may also fail from a vehicle being loaded beyond its GVWR or pulling more than its rated towing capacity, which can cause clutch pressure plate overheating and warpage.
What is the difference between the clutch plate and the pressure plate?
The clutch plate is a circular disc covered with a fibrous friction material. It is connected to the transmission input shaft and is not in motion when the vehicle is stopped. A more common name for the clutch plate is the clutch disc. The clutch pressure plate, on the other hand, is a circular steel plate that is connected to the engine, and is always spinning when the engine is running. The clutch pressure plate applies pressure to the clutch disc when the clutch pedal is released, thereby bringing the transmission input shaft up to the rotational speed of the clutch pressure plate and engine.

This is demo Question

This is demo Answer

Compare discounted prices upfront at over 26,000 shops nationwide.

Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.

+ More

Join the world's largest consumer fleet.

Over 1.5 Million already have.

Questions? We've got answers.

Our digital platform is designed to make maintaining and repairing your vehicle a breeze – from conveniently scheduling services, finding shops in the area, approving work remotely or getting free expert advice so you can be confident about any decision.

There’s nothing to pay up-front; you simply only pay for repairs or services that you approve. 

Nope, no funny business here—just get the job done and pay for what you approve. It really is that simple.

With our handy nationwide network of over 26,000 shops to choose from and free sign-up – you can rest assured your car is in good hands. 

With CarAdvise, you don’t need a fleet of 100,000 cars to get an amazing deal on car services. Our discounted prices are guaranteed to beat any other retail options – so why spend more? On average customers save 15-40% when they choose us – that could mean hundreds saved in just one service job.

Learn More

At CarAdvise, we believe life is unpredictable and if you need to reschedule or cancel an appointment – no worries! We promise there’s never any penalty for missed appointments.

We’ve partnered with the best in the industry such as Firestone, Pep Boys, JiffyLube, Canadian Tire, NTB, Meineke, Tire Kingdom, AAMCO, Monro, FCA dealerships and many independent shops across the country.

Ready to join the party? Just a few clicks and you’ll be all set – create your account now. You can easily create your account here.

Just email us at [email protected] or give our friendly team a ring at (844) 923-8473 and we’ll be sure to lend you the helping hand you need.