Average cost of CV Axle Replacement for popular vehicle models in Bullhead City:
Avg. cost $837
Avg. cost $381
Avg. cost $562
THE IMPORTANCE OF CV Axle Replacement
What is a CV axle and how does it work?
A CV axle is a component of front-wheel-drive and all-wheel-drive vehicles. Also known as “half shafts”, these axles transfer power from the transmission or transaxle to the wheels. An individual axle is made up of a short, solid metal shaft with a special joint - the Constant Velocity joint - at each end. These joints allow for all of the up, down, in, and out movement of an independent suspension. They pivot in any direction to compensate for the suspension and steering while maintaining a consistent, or “constant”, velocity. Each CV joint on the axle is lubricated with grease and is encased in a rubber boot that also serves to keep it free from debris.
Signs that a CV axle needs to be replaced
Most passenger cars and SUVs on the road today feature either front-wheel drive or all-wheel drive. If your vehicle falls into one of these categories, it also features CV axles. Those components are important to proper function of the drivetrain, including the steering, suspension, and transfer of power to your wheels. When a CV axle goes bad, you might notice one or more of the following signs:
A clicking sound that can be heard when your vehicle is accelerating through a curve
A clunking noise upon deceleration
Excessive vibration at high speeds
Grease leaking from one of the rubber boots
FREQUENCY OF INSPECTION
How does a technician perform CV Axle Replacement ?
CV axle replacement is not generally a simple procedure. It requires that a mechanic first safely lift and support your vehicle off of the ground and remove the wheel and tire. While the procedure for replacing a CV axle differs from one make and model to the next, the mechanic will need to do the following:
Remove the large nut retaining the CV axle and carefully loosen the axle inside the wheel hub
Set back any wiring that is in the way
Remove bolts to detach the steering knuckle from the strut assembly
In some cases, remove the tire rod end and lower control arm/ball joint from the steering knuckle
Work the outer end of the axle shaft out of the steering knuckle
Dislodge the CV axle from the transmission/transaxle or differential (may be bolted or retained with an internal clip
Insert the inner end of the new axle shaft into the transmission/transaxle or differential, taking care to avoid damaging the part or the retainer
Insert the outer end of the shaft into the steering knuckle
Reinstall all other components and torque the fasteners
Check and top off the transmission fluid
OTHER QUESTIONS CUSTOMERS ASK
Can you drive with a broken CV axle?
It may be possible to drive for a short period with a CV axle that is going bad. Initial damage to the component often results from dirt or other contaminants entering the CV joint boots and wearing away at the joint. Over time, the component will show greater signs of damage and will eventually fail completely. It is difficult to know at what point that will happen. Since the CV axle is the only part that transmits power from your engine and transmission to the wheels, if it fails, you may be left stranded.
Should I replace both CV axles or just one?
The problems that typically arise with CV axles are related to damage or deterioration to the protective boots that cover the CV joints. The boots are filled with grease that lubricates the joints, and they keep out dirt and debris that can reduce the lifespan of the axles. If a boot becomes damaged by a foreign object on the road or other unusual event, you might get away with replacing only the damaged component. However, if the boots are getting old with high miles, it is likely that both (or all) axles will need to be replaced.
What is the difference between a CV joint and a CV axle?
A CV, or “Constant Velocity”, joint is part of a CV axle. Actually, there is a CV joint at each end of the axle, one on the inside that connects to the transmission/transaxle (or the differential), and the other that connects to the wheel hub. Each joint is capable of moving up, down, in, and out while maintaining continuous rotational movement. Having a CV joint at the end of each CV axle allows the wheels to keep turning under power while the steering and suspension moves in multiple directions.
What are some other common services related to CV Axle Replacement?
We help you search, schedule, and save on your car’s maintenance and repair.
With CarAdvise, you can save 10-40% on your vehicle maintenance and repair.
Partner with trusted auto repair shops like Firestone, Pep Boys and Jiffylube offering CarAdvise at over 26,000 shops nationwide:
Trusted by over 1 Million users
When you book with CarAdvise, get access to our ASE trained techs to answer any questions you have about your repair.
We help you save money
We guarantee that any service you book through us will cost you less than any retail price you can find.
We guarantee our work
12 Month, 12,000 Mile Warranty on every service booked through CarAdvise.