A Cylinder Head Assembly Replacement cost in Lincoln in 2023

The average cost for a cylinder head assembly replacement with CarAdvise is $995 and the range is generally between $508 and $2434.

Get expert advice, find shops, schedule, approve, & pay for any service - guaranteed to be lower than in-store retail price.

Get your vehicle's inside scoop without the mumbo jumbo.

Lower than retail price

Guaranteed or 5% back

We've got your back

12k/12mo Warranty

Peace of mind

14-Day Assurance


A Cylinder Head Assembly Replacement costs by shop in Lincoln.

CarAdvise Customers save an average of $199 on A Cylinder Head Assembly Replacement.


Average cost of A Cylinder Head Assembly Replacement for popular vehicle models in Lincoln:

Car Model

Avg. cost


THE IMPORTANCE OF A Cylinder Head Assembly Replacement

What is a cylinder head and how does it work?

An engine cylinder is a cylindrical compartment in which a piston travels inside your engine. Most modern engines feature four to eight cylinders. The cylinder head mounts on top of the engine, creating a cap on the cylinders. The cylinder head also houses the spark plugs, intake valves, exhaust valves, and, in most cases, the camshaft(s).

A four-cycle internal combustion engine, like the one used in your non-electric vehicle, does four things in succession. First, each piston in its turn moves downward in the cylinder, creating a vacuum and drawing in a mixture of air and fuel from the fuel injector. Second, the piston moves upward toward the cylinder head, compressing the air and fuel. Third, at just the right time, the spark plug fires, setting off a combustion event that drives the piston downward. Fourth, the piston travels upward again, this time expelling the exhaust gases that are the byproduct of combustion.

In order for this sequence of events to happen, each cylinder is fitted with one or more intake and exhaust valves that open and close in response to the action of the camshaft. Since an engine can have anywhere from four to eight cylinders or pistons, and each cylinder can have up to four valves, it is possible for a camshaft (multiple camshafts) to actuate thirty two valves at a time. All of this activity and more happens inside the cylinder head.


How do I know if my vehicle needs a cylinder head replaced?

Problems with a cylinder head often stem from cracking or warping, often due to engine overheating. Lack of engine lubrication or oil changes that are few and far between can cause problems with components inside the cylinder head as well, the camshaft(s), valves, and more. If your cylinder head goes bad, you might notice one or more of the following signs:

Visible coolant leak from the engine

Low coolant level

Thick white smoke coming from the exhaust

A syrupy smell

This text is only for demo


How does a technician perform A Cylinder Head Assembly Replacement ?

Cylinder head replacement is a complex task that requires a good deal of tools and training. A technician must drain the cooling system of coolant, remove any engine covers and other components that are in the way of access to the cylinder head, and remove both the intake and exhaust manifolds connected to it. Each of these tasks is fairly involved in and of itself, and that is only the beginning of the repair. From there, a technician will take the following general (and abbreviated) steps:

  • Remove the serpentine drive belt
  • Decompress and disconnect the fuel rail, throttle cable, and kickdown cable
  • Remove the valve cover(s)
  • Disconnect the spark plug wires (or remove the coils if they are mounted on the plugs)
  • Unplug and remove any sensors attached to the cylinder head (camshaft position sensor, etc.)
  • Remove the crankshaft pulley and timing cover
  • Remove the timing belt or chain
  • Remove the camshaft(s) and valves
  • Unbolt the cylinder head from the engine block and remove from the vehicle With the cylinder head outside of the vehicle, the replacement part must be prepped and a fresh gasket fitted before it is installed, torqued to manufacturer’s specifications, and refitted with the valves and camshaft(s). The timing components must be carefully synchronized to ensure proper engine operation. Then all of the other components must be reinstalled.


Is it okay to replace just one cylinder head?
Engines that are arranged in a straight or inline configuration have only a single cylinder head. V6 and V8 engines, on the other hand, have two. If one cylinder head goes bad, but the other does not, it is usually okay to replace only the failed component. Unfortunately, the factors that contribute to one bad cylinder head can also affect the other.
Can a cylinder head be repaired?
Whether or not a cylinder head can be repaired depends on the severity of the damage. Small cracks can be welded and the old cylinder head can be machined to be reused. A warped head can sometimes be ground even and reused as well. But a severely damaged cylinder head cannot. In some cases, it might make economic sense to simply replace a bad cylinder head even if it might be repairable.
Why do cylinder heads fail?
The main reason that a cylinder head fails is engine overheating, usually caused by either low coolant, restricted flow of coolant, or a blown head gasket. Poor maintenance can also contribute to a bad cylinder head, as the components inside - the camshaft(s), valves, etc. - require ample oil to work properly.

This is demo Question

This is demo Answer

Compare discounted prices upfront at over 26,000 shops nationwide.

Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.

+ More

Join the world's largest consumer fleet.

Over 1.5 Million already have.

Questions? We've got answers.

Our digital platform is designed to make maintaining and repairing your vehicle a breeze – from conveniently scheduling services, finding shops in the area, approving work remotely or getting free expert advice so you can be confident about any decision.

There’s nothing to pay up-front; you simply only pay for repairs or services that you approve. 

Nope, no funny business here—just get the job done and pay for what you approve. It really is that simple.

With our handy nationwide network of over 26,000 shops to choose from and free sign-up – you can rest assured your car is in good hands. 

With CarAdvise, you don’t need a fleet of 100,000 cars to get an amazing deal on car services. Our discounted prices are guaranteed to beat any other retail options – so why spend more? On average customers save 15-40% when they choose us – that could mean hundreds saved in just one service job.

Learn More

At CarAdvise, we believe life is unpredictable and if you need to reschedule or cancel an appointment – no worries! We promise there’s never any penalty for missed appointments.

We’ve partnered with the best in the industry such as Firestone, Pep Boys, JiffyLube, Canadian Tire, NTB, Meineke, Tire Kingdom, AAMCO, Monro, FCA dealerships and many independent shops across the country.

Ready to join the party? Just a few clicks and you’ll be all set – create your account now. You can easily create your account here.

Just email us at [email protected] or give our friendly team a ring at (844) 923-8473 and we’ll be sure to lend you the helping hand you need.