A Drive Belt Idler Pulley Replacement cost in Oakland Park in 2024

The average cost for a drive belt idler pulley replacement with CarAdvise is $114 and the range is generally between $45 and $245.

Get expert advice, find shops, schedule, approve, & pay for any service - guaranteed to be lower than in-store retail price.

Get your vehicle's inside scoop without the mumbo jumbo.

Lower than retail price

Guaranteed or 5% back

We've got your back

12k/12mo Warranty

Peace of mind

14-Day Assurance

AVERAGE COST IN Oakland Park

A Drive Belt Idler Pulley Replacement costs by shop in Oakland Park.

CarAdvise Customers save an average of $23 on A Drive Belt Idler Pulley Replacement.

POPULAR VEHICLES

Average cost of A Drive Belt Idler Pulley Replacement for popular vehicle models in Oakland Park:

Car Model

Avg. cost

$50

THE IMPORTANCE OF A Drive Belt Idler Pulley Replacement

What is a drive belt idler pulley and how does it work?

The rubber drive belt on your car or truck allows the engine to provide power for several vehicle systems. Attached to your engine are an alternator, power steering pump, A/C compressor, and (on some engines) a water pump. Each one of these engine components has a pulley on the front. The drive belt, often called a “serpentine belt”, snakes its way around all of these pulleys to make them spin when the engine is running. The idler pulley helps to route the belt properly so as to ensure contact with all of the other pulleys.

COMMON SYMPTOMS

Signs that a drive belt idler pulley needs to be replaced

When a drive belt idler pulley is going bad or fails, the following signs might serve notice of its condition:

Squealing noise coming from the front of your engine that raises in pitch with engine RPMs

The belt comes off of its pulleys

Your battery warning light comes on

The drive belt flutters or tracks in an off-centered manner

This text is only for demo

FREQUENCY OF INSPECTION

How does a technician perform A Drive Belt Idler Pulley Replacement ?

To access the drive belt idler pulley, a technician must first remove any shields, guards, or accessories that are in the way. Once the pulley is in view, the drive belt must be removed. The following list is typical of the procedure to replace a damaged or worn idler pulley:

  • Release any tension from the drive belt tensioner by either loosening the tension bolt or turning against the tension with a special service tool
  • Taking care to note the routing of the serpentine belt in advance, remove the belt from the engine
  • Unbolt the old idler pulley and remove it from its mounting location
  • Install the new idler pulley and torque the mounting bolt(s) to the manufacturer’s specifications
  • Inspect all other related components for signs of wear
  • Reinstall drive belt and load tensioner
  • Reinstall any components that were removed for access

OTHER QUESTIONS CUSTOMERS ASK

What’s the difference between a tensioner and an idler pulley?
The main difference between a drive belt tensioner and an idler pulley is its function. Both feature pulleys around which the serpentine drive belt snakes its way in order to power up engine accessories. But, where the tensioner pulley serves to maintain tension on the belt to keep it taught, the idler pulley serves to route the belt and keep it in proper alignment. The idler pulley might run along the flat side or the grooved side of the belt.
What happens if a drive belt idler pulley goes bad?
A loose or seized drive belt idler pulley can cause your drive belt to break or come off of the engine. When that happens, you will likely lose important functions of your vehicle. For instance, if you are driving, you could lose power steering assist, something that can be dangerous if you happen to be turning through an intersection at the time. Also, your alternator would no longer be operational, so your engine would eventually stall out for lack of electrical power. And your battery would die. Because the drive belt powers the water pump on some engines, dangerous overheating could be another result of a failed drive belt idler pulley.
Can you drive without an idler pulley?
If a drive belt idler pulley is going bad, the resulting damage - namely a broken or thrown belt - might not be immediate. But they might be. If you suspect that the idler pulley is going bad, or any other drive belt component, such as the belt tensioner, is failing, make sure to have it inspected and replaced as soon as possible to avoid a potentially dangerous loss of vehicle function.

This is demo Question

This is demo Answer

Compare discounted prices upfront at over 26,000 shops nationwide.

Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.

+ More

Join the world's largest consumer fleet.

Over 1.5 Million already have.