U-Joint Replacement cost in Bowie in 2023

The average cost for a driveshaft u-joint replacement is $188 and the range is generally between $136 and $403.

Save 10-40% on your vehicle maintenance and repair. We can guarantee that any service you book through us will cost you less than any retail price you can find.

Not the right city? Click here

Our data is sourced from over 100,000 repairs and thousand of different repair shops, and reviewed by our ASE certified editorial team.


U-Joint Replacement costs by shop in Bowie.

CarAdvise Customers save an average of $38 on U-Joint Replacement.


Average cost of U-Joint Replacement for popular vehicle models in Bowie:

THE IMPORTANCE OF U-Joint Replacement

What is a driveshaft u-joint and how does it work?

A u-joint, short for “universal joint”, is a component of the driveshaft in four-wheel and all-wheel-drive vehicles.

The function of a driveshaft is to transfer rotational force or torque from the engine and transmission to the differential(s) that turns the drive axles in a vehicle. The driveshaft is a long, cylindrical tube that extends along the underside of a vehicle from front to back. It connects the transmission or transfer case to another gearbox, the differential. There, the rotation of the driveshaft is turned ninety degrees to spin the axles, which, in turn, spin the wheels.

In order to accommodate the up and down movement of the suspension, the driveshaft is fitted with a u-joint at each end. The u-joint is something like a four way hinge that resembles a plus sign. It consists of four bearing cups filled with needle-shaped bearings and grease to allow the driveshaft to change angles yet still be able to rotate under constant torque. One u-joint connects the driveshaft to the output yoke of the transmission or transfer case, and the other u-joint connects the shaft to the yoke of the differential.


How do I know if my vehicle needs a u-joint replaced?

The u-joints on a driveshaft are subject to quite a bit of stress as they transfer torque from the engine and transmission to the axles and wheels. Because of this stress, they are sometimes prone to wear out. When they do, they exhibit a few telltale signs that they need to be replaced, including:

A squeaking noise while driving that increases with vehicle speed

A clunking noise when shifting from forward to reverse or vice versa

Vibration while driving that increases with vehicle speed


How does a technician perform U-Joint Replacement ?

To replace a u-joint on a driveshaft, a technician must first remove the driveshaft from your vehicle. That process requires that the vehicle be safely lifted and supported in the air for access. Any shields, guards, or crossmembers in the way are removed. Once the driveshaft has been detached and dislodged at each end, it is pulled from the vehicle entirely and moved to another location for disassembly.

The procedure for replacing u-joints differs from one vehicle to the next, but commonly calls for the technician to use a hydraulic press to extract the old u-joints and insert the new ones. Each of the four corners of a u-joint are suspended inside their respective bearing cups, where lubricated needle bearings allow the u-joint to move freely.

The bearing cups are forced into place during installation to retain the u-joint. Therefore, a technician must remove the bearing cup retaining clips and press out the old bearing cups before pressing in the new ones to secure the new u-joint. Along the way, the technician must take care to ensure that the needle bearings are aligned properly. The bearing caps must also be adjusted accurately so that the driveshaft spins true and balanced.

Once the u-joints have been fitted, the driveshaft is reinstalled in your vehicle.


What happens when your u-joints go out?
When the u-joints on your vehicle wear out, you might hear or feel a clunk when you shift from forward to reverse and back again. That is because a bad u-joint tends to develop excessive play. It becomes sloppy and allows the driveshaft to rotate momentarily before taking up the slack, rather than responding immediately. You might also feel a vibration while driving or hear a squeaking noise that changes pitch with the speed of your vehicle.
Can you drive with a broken u-joint?
If your u-joint is going bad, it is only a matter of time before it fails completely. If the u-joint breaks while you are driving, the driveshaft will either detach and slam repeatedly into the underbody of your vehicle or fall onto the ground. Or it could do both. No matter what, significant damage can occur to brake lines, wiring, and other components, including the driveshaft itself.
Should I replace both u-joints?
It is possible that only one of the two u-joints on your driveshaft are bad. Still, it is wise to replace both simultaneously. If one has failed, the other is likely to follow. Since u-joint replacement requires that the driveshaft be removed from your vehicle, it is easier to have both done at the same time rather than undergo two separate services.

We help you search, schedule, and save on your car’s maintenance and repair.

With CarAdvise, you can save 10-40% on your vehicle maintenance and repair.

Partner with trusted auto repair shops like Firestone, Pep Boys and Jiffylube offering CarAdvise at over 26,000 shops nationwide:

Trusted by over 1 Million users

When you book with CarAdvise, get access to our ASE trained techs to answer any questions you have about your repair.

We help you save money

We guarantee that any service you book through us will cost you less than any retail price you can find.

We guarantee our work

12 Month, 12,000 Mile Warranty on every service booked through CarAdvise.