An EGR Valve Temperature Sensor Replacement cost in Cape Coral in 2023

The average cost for an egr valve temperature sensor replacement is $337

Get expert advice, find shops, schedule, approve, & pay for any service - guaranteed to be lower than in-store retail price.

Get your vehicle's inside scoop without the mumbo jumbo.

Lower than retail price

Guaranteed or 5% back

We've got your back

12k/12mo Warranty

Peace of mind

14-Day Assurance

AVERAGE COST IN Cape Coral

An EGR Valve Temperature Sensor Replacement costs by shop in Cape Coral.

CarAdvise Customers save an average of $67 on An EGR Valve Temperature Sensor Replacement.

POPULAR VEHICLES

Average cost of An EGR Valve Temperature Sensor Replacement for popular vehicle models in Cape Coral:

Car Model

Avg. cost

$50

THE IMPORTANCE OF An EGR Valve Temperature Sensor Replacement

What is an EGR valve temperature sensor and how does it work?

The EGR (Exhaust Gas Recirculation) system is an emissions control system that takes some of the exhaust gases from your engine’s exhaust manifold and recirculates them back into the engine through the intake manifold. The exhaust gases are then drawn into the engine and combined with fresh air and fuel entering the cylinders. The system helps your engine to run more efficiently, consume less fuel, and put out fewer emissions.

At the heart of the emissions system is the EGR valve, and central to its operation is the EGR valve temperature sensor that lets the valve know when to open and close.

An EGR valve temperature sensor monitors the temperature of the gases flowing from the EGR valve during engine operation. The information it receives is sent to the engine’s computer, the ECM (Engine Control Module) where it is used to determine how much to open or close the EGR valve in order to produce the right amount of gas flow for a given condition.

COMMON SYMPTOMS

How do I know if my vehicle needs a new EGR valve temperature sensor?

The job of the EGR valve temperature sensor is to report the temperature of EGR system combustion gases back to the Engine Control Module to assist in determining the proper EGR gas flow rate at any given time or engine condition. These gases can be in the neighborhood of two thousand degrees Fahrenheit. They can also carry harsh chemicals that form a corrosive condensate on any and all EGR components.

If the EGR temperature sensor malfunctions due to electrical failure or contamination, you may notice one or more of the following symptoms:

Check engine light comes on

Vehicle shaking or running rough, especially when at partial throttle or idle

Vehicle spark knocking

Rough idle

This text is only for demo

FREQUENCY OF INSPECTION

How does a technician perform An EGR Valve Temperature Sensor Replacement ?

The EGR valve temperature sensor is usually mounted near the EGR valve. In order to replace the sensor, a technician will first disconnect your vehicle’s battery, taking care to preserve the sensitive computer memory (and your audio settings). Any shields, guards, covers, or ducts that are in the way of access to the sensor must be removed. From there, the procedure is generally straightforward and includes the following steps:

  • Disconnect the wires attached to the sensor
  • Unscrew the sensor from its mount and replace it with a new one
  • Reconnect the wiring
  • Reinstall any shields, guards, covers, or ducts that were removed
  • Run an EGR Function test with a scan-tool to verify the system is working correctly

OTHER QUESTIONS CUSTOMERS ASK

Does EGR affect engine performance?
EGR directly affects engine performance. It changes the amount of oxygen that enters the combustion chamber with each intake stroke of the piston. EGR has a noticeable effect on gas mileage as well as reduction of spark knock. And without a properly working EGR system, your vehicle will likely be unable to pass an emissions test.
What does an EGR temperature sensor look like?
The EGR temperature sensor looks similar to any other temperature sensor on the vehicle. It is a small probe that is inserted into the exhaust manifold. This particular sensor must have a stainless steel body and threads to withstand the heat and corrosive condensate present in the EGR system. The EGR temperature sensor will also likely have two wires leading from the wiring harness.
Can a faulty EGR valve cause overheating?
A faulty EGR stuck in the open position may cause the engine to idle poorly, shake, and fail emissions testing. A faulty EGR valve stuck in the closed position will cause cylinder temperatures to rise, spark knock to occur, and also fail emissions testing. The additional heat generated, however, is not enough to cause engine overheating. The “overheating” related to a faulty EGR valve takes place inside the combustion chambers, certainly affecting engine operation, but not causing the engine to overheat.

This is demo Question

This is demo Answer

Compare discounted prices upfront at over 26,000 shops nationwide.

Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.

+ More

Join the world's largest consumer fleet.

Over 1.5 Million already have.

Questions? We've got answers.

Our digital platform is designed to make maintaining and repairing your vehicle a breeze – from conveniently scheduling services, finding shops in the area, approving work remotely or getting free expert advice so you can be confident about any decision.

There’s nothing to pay up-front; you simply only pay for repairs or services that you approve. 

Nope, no funny business here—just get the job done and pay for what you approve. It really is that simple.

With our handy nationwide network of over 26,000 shops to choose from and free sign-up – you can rest assured your car is in good hands. 

With CarAdvise, you don’t need a fleet of 100,000 cars to get an amazing deal on car services. Our discounted prices are guaranteed to beat any other retail options – so why spend more? On average customers save 15-40% when they choose us – that could mean hundreds saved in just one service job.

Learn More

At CarAdvise, we believe life is unpredictable and if you need to reschedule or cancel an appointment – no worries! We promise there’s never any penalty for missed appointments.

We’ve partnered with the best in the industry such as Firestone, Pep Boys, JiffyLube, Canadian Tire, NTB, Meineke, Tire Kingdom, AAMCO, Monro, FCA dealerships and many independent shops across the country.

Ready to join the party? Just a few clicks and you’ll be all set – create your account now. You can easily create your account here.

Just email us at [email protected] or give our friendly team a ring at (844) 923-8473 and we’ll be sure to lend you the helping hand you need.