An Engine Control Module Replacement costs by shop in Johns Creek.
CarAdvise Customers save an average of $38 on An Engine Control Module Replacement.
Average cost of An Engine Control Module Replacement for popular vehicle models in Johns Creek:
Avg. cost $385
Dodge Grand Caravan
Avg. cost $540
Avg. cost $139
THE IMPORTANCE OF An Engine Control Module Replacement
What is an engine control module and how does it work?
An engine control module, or ECM, is a small computer that controls engine function. Also referred to as an engine control unit (ECU) or a powertrain control module (PCM), this electronic device receives and processes data from an array of sensors in and on your engine.
In fact, the ECM receives information from nearly every system in your vehicle - the transmission, traction control, anti-lock brakes, starting and charging, and more. It adjusts the amount of air and fuel that enters the combustion chambers. It controls the timing of the spark plugs. It talks to the anti-theft system to confirm that the right key is being used in the ignition so that your vehicle cannot be easily stolen. The ECM even communicates with other modules, such as the body control module (BCM). It then uses that data to calculate and control dozens of operations to ensure that your vehicle operates properly at peak power and efficiency.
When there is a problem with a vehicle system (such as a bad oxygen sensor, or engine overheating), the ECM stores a diagnostic trouble code that can be accessed and interpreted by a mechanic, and it turns on the check engine light to let you know there is a problem.
How do I know if my vehicle needs a new engine control module?
The main job of the engine control module is to ensure proper operation of your engine. And since the ECM is directly responsible for overseeing most of the electrical activity, if it malfunctions, your engine will likely show signs that it is in trouble. Many of the signs of a bad ECM mirror other issues. Still, your vehicle might need a new ECM if you notice any of the following:
Your check engine light comes on
The engine sputters, lacks power, stalls, or refuses to start
You hear backfiring or afterfiring (backfire after the engine is turned off)
Your vehicle fails an emissions test
This text is only for demo
FREQUENCY OF INSPECTION
How does a technician perform An Engine Control Module Replacement ?
The engine control module is located in different places depending on the vehicle make and model. It might be found in a housing inside the engine compartment, underneath a seat, behind a kick panel, or underneath the floorboard. To replace the engine control module, a technician must first locate the device and then perform the following general tasks:
Disconnect the negative battery terminal to disengage the electrical system
Remove any shields, guards, covers, or trim necessary to gain access to the engine control module
Disconnect the electrical connector on the module
Remove any mounting screws or hardware
Extract the module from its mounting location
Insert and fasten the new module in place
Reconnect the electrical connector
Re install any shields, guards, covers, or trim components that were removed
Program the new engine control module with a scan-tool to ensure compatibility with the rest of the vehicle. (Due to the complexity associated with programming some ECMs, this step might need to be performed at a dealership)
OTHER QUESTIONS CUSTOMERS ASK
Can I replace an ECM myself?
The procedure for replacing an ECM may appear simple - remove a few parts for access, unplug the unit, and replace it with a new one. However, in order to maintain the warranty of the new ECM and allow for proper programming after installation, the new ECM should be installed by a qualified technician. Installing a new ECM yourself could lead to invalidating the warranty. It could also lead to your vehicle being towed to a repair shop after your attempt if you do not possess the tools and training to complete the repair..
Can you drive with a failing ECM?
A failing ECM is very unpredictable. The engine might run well for a few minutes or even hours at a time. Or it might stall without warning and within seconds of starting. Your engine might not restart at all until the bad ECM is replaced with a new one. Driving with a failing ECM is not only dangerous enough to cause a crash, but can lead to even more costly repairs.
What happens if your ECM fails?
A failed engine control module (ECM) leaves your vehicle without an engine management system. Since nearly all of the functions of your engine are monitored and controlled by the ECM (not to mention most of the other systems on your vehicle), it is unlikely that your engine will run for long if the ECM goes bad. It is not uncommon for a bad ECM to lead to poor engine performance, stalling, and failure to start.
This is demo Question
This is demo Answer
Compare discounted prices upfront at over 26,000 shops nationwide.
Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.
Our digital platform is designed to make maintaining and repairing your vehicle a breeze – from conveniently scheduling services, finding shops in the area, approving work remotely or getting free expert advice so you can be confident about any decision.
How much does CarAdvise cost?
There’s nothing to pay up-front; you simply only pay for repairs or services that you approve.
Are there any additional fees?
Nope, no funny business here—just get the job done and pay for what you approve. It really is that simple.
Are there shops available in my area?
With our handy nationwide network of over 26,000 shops to choose from and free sign-up – you can rest assured your car is in good hands.
How does CarAdvise pricing work?
With CarAdvise, you don’t need a fleet of 100,000 cars to get an amazing deal on car services. Our discounted prices are guaranteed to beat any other retail options – so why spend more? On average customers save 15-40% when they choose us – that could mean hundreds saved in just one service job.
At CarAdvise, we believe life is unpredictable and if you need to reschedule or cancel an appointment – no worries! We promise there’s never any penalty for missed appointments.
What shops do you work with?
We’ve partnered with the best in the industry such as Firestone, Pep Boys, JiffyLube, Canadian Tire, NTB, Meineke, Tire Kingdom, AAMCO, Monro, FCA dealerships and many independent shops across the country.
How do I sign up?
Ready to join the party? Just a few clicks and you’ll be all set – create your account now. You can easily create your account here.
How do I get more help?
Just email us at [email protected] or give our friendly team a ring at (844) 923-8473 and we’ll be sure to lend you the helping hand you need.