Purge Control Valve Replacement cost in Rancho Palos Verdes in 2023

The average cost for an evap purge control solenoid replacement is $161 and the range is generally between $105 and $294.

Save 10-40% on your vehicle maintenance and repair. We can guarantee that any service you book through us will cost you less than any retail price you can find.

Not the right city? Click here

Our data is sourced from over 100,000 repairs and thousand of different repair shops, and reviewed by our ASE certified editorial team.

AVERAGE COST IN Rancho Palos Verdes

Purge Control Valve Replacement costs by shop in Rancho Palos Verdes.

CarAdvise Customers save an average of $32 on Purge Control Valve Replacement.

POPULAR VEHICLES

Average cost of Purge Control Valve Replacement for popular vehicle models in Rancho Palos Verdes:

THE IMPORTANCE OF Purge Control Valve Replacement

What is an EVAP purge control valve and how does it work?

The purge control valve is part of the Evaporative Emission Control System (EVAP) of a vehicle. The EVAP system captures gasoline vapors coming from the fuel tank and routes them to be burned in the engine instead of venting into the atmosphere. Fuel vapors that are allowed to escape result not only in lost fuel but also emissions that are harmful to humans and the environment.

Also known as a purge solenoid, the purge control valve allows the fuel tank to be vented so that pressure does not build up inside, while at the same time preventing those vapors from escaping. Vapors that are collected are stored in a special vapor canister where they are absorbed by activated carbon (charcoal) and stored there until the engine control module (ECM) signals the purge valve (solenoid) to open. Once the purge control valve opens, the fumes stored in the canister are drawn out by the engine and burned as part of the combustion process.

COMMON SYMPTOMS

How do I know if my vehicle needs the purge control valve replaced?

When a purge control valve (solenoid) fails, it usually triggers the check engine light to come on. A diagnostic scan of the vehicle will reveal a trouble code related to pressure in the EVAP system. Besides the check engine light and related trouble code, other possible symptoms include:

Difficulty starting your engine

A rough idle

Decreased fuel economy

A failed emissions test

FREQUENCY OF INSPECTION

How does a technician perform Purge Control Valve Replacement ?

To replace the purge control valve (solenoid), a technician will generally take the following steps:



  • Disconnect the negative battery terminal, taking care to preserve the vehicle computer memory
  • Remove any shields, guards, covers, or ducts to gain access to the purge control valve
  • Disconnect and remove the wiring from the component
  • Disconnect any EVAP hoses attached to the purge control valve
  • Remove any screws or fasteners holding the device in place and remove it from the vehicle
  • Insert and fasten the new purge control valve in place
  • Reconnect the hoses and wiring
  • Reinstall any shields, guards, covers, or ducts that were removed
  • Reconnect the battery terminal
  • Start the vehicle and verify the repair by using a scan-tool to test the EVAP system and cycle the EVAP purge control valve/solenoid

OTHER QUESTIONS CUSTOMERS ASK

Can you drive with a faulty purge valve?
The results of driving with a faulty purge valve depend on which position the valve is in when it fails. If the purge valve fails in the closed position, you most likely won't notice driveability issues with your vehicle. But you might find that the check engine light comes on, and you might notice poor fuel mileage. If, on the other hand, the valve fails in the open position, your engine can run rough, stall, shake, be hard to start, and suffer from poor fuel economy.
What happens if the purge control valve fails?
The EVAP system feeds fuel vapors into the engine to be burned rather than be released into the atmosphere. Knowing this, the engine’s computer adjusts the air to fuel ratio to compensate for the addition of fuel. If the purge control valve fails, an excess of fuel (or a decrease) will be present inside the combustion chambers, causing your engine to run either too rich or too lean. Either is problematic for your engine.
What causes purge control valve failure?
Purge control valve failure can be related to a mechanical failure of the device itself, or damaged, decayed, and dirty wires leading to the valve.

Questions? We've got answers.

Our digital platform is designed to make maintaining and repairing your vehicle a breeze – from conveniently scheduling services, finding shops in the area, approving work remotely or getting free expert advice so you can be confident about any decision.

There’s nothing to pay up-front; you simply only pay for repairs or services that you approve. 

Nope, no funny business here—just get the job done and pay for what you approve. It really is that simple.

With our handy nationwide network of over 26,000 shops to choose from and free sign-up – you can rest assured your car is in good hands. 

With CarAdvise, you don’t need a fleet of 100,000 cars to get an amazing deal on car services. Our discounted prices are guaranteed to beat any other retail options – so why spend more? On average customers save 15-40% when they choose us – that could mean hundreds saved in just one service job.

Learn More

At CarAdvise, we believe life is unpredictable and if you need to reschedule or cancel an appointment – no worries! We promise there’s never any penalty for missed appointments.

We’ve partnered with the best in the industry such as Firestone, Pep Boys, JiffyLube, Canadian Tire, NTB, Meineke, Tire Kingdom, AAMCO, Monro, FCA dealerships and many independent shops across the country.

Ready to join the party? Just a few clicks and you’ll be all set – create your account now. You can easily create your account here.

Just email us at support@caradvise.com or give our friendly team a ring at (844) 923-8473 and we’ll be sure to lend you the helping hand you need.