Flywheel Replacement cost in Texarkana in 2023

The average cost for a flywheel replacement is $326 and the range is generally between $52 and $585.

Save 10-40% on your vehicle maintenance and repair. We can guarantee that any service you book through us will cost you less than any retail price you can find.

Not the right city? Click here

Our data is sourced from over 100,000 repairs and thousand of different repair shops, and reviewed by our ASE certified editorial team.


Flywheel Replacement costs by shop in Texarkana.

CarAdvise Customers save an average of $65 on Flywheel Replacement.


Average cost of Flywheel Replacement for popular vehicle models in Texarkana:

THE IMPORTANCE OF Flywheel Replacement

What is a flywheel and how does it work?

A flywheel is a large flat metal disc that is bolted to the rear of an engine’s crankshaft in a vehicle with a manual transmission.

The flywheel helps to transfer the power of your engine to the transmission. It spins with the crankshaft and interacts with the clutch disc to engage the drive wheels. The flywheel stores energy to supplement engine torque and help to balance out the power stroke of each cylinder as it fires. And it helps to reduce engine vibrations. The flywheel also has a series of teeth cut into its outer edge. These teeth mesh with the starter, allowing the starter motor to spin the crankshaft during the startup process.


How do I know if my vehicle needs a flywheel replacement?

A flywheel that is worn or damaged will display a variety of symptoms, depending on what has gone wrong. When a clutch assembly wears out, the face of the flywheel will commonly wear out as well. The flywheel can also become warped from excessive heat. The teeth on a flywheel can also break off and prevent proper articulation with the starter.

If you notice one or more of the following signs, your vehicle might need a new flywheel:

An unusual vibration or pulsing felt in the clutch pedal

The clutch “slips” during acceleration

Chattering or shaking when you engage the clutch

The transmission pops out of gear while you are driving


How does a technician perform Flywheel Replacement ?

Flywheel replacement is a fairly involved process. It requires complete removal of the transmission from your vehicle, among other things. If the service is being done at the same time that your clutch is being replaced, the added labor is not extensive.

To replace your engine flywheel, a technician will first need to lift and support your vehicle in the air for access. From there, the following general steps are performed:

  • Remove any shields and guards for access
  • Disconnect and remove the driveshaft
  • Remove the transfer case (if so equipped)
  • Unbolt the transmission from the engine and remove the transmission from the vehicle
  • Disassemble the clutch assembly and remove it from the flywheel
  • Unbolt and remove the flywheel Reassembly occurs in roughly the reverse order of disassembly, with a few exceptions. One exception is the need to bleed the clutch slave cylinder of air after the system is refilled with hydraulic fluid. Special alignment tools and procedures may be required to properly reassemble and install the clutch assembly. Any fluid lost must also be topped off.


What causes a flywheel to fail?
A flywheel may fail due to overheating from exceeding a vehicle's rated towing capacity or overloading it past the GVWR. This leads to additional stress on the drivetrain, which ultimately can warp or crack the flywheel. Aggressive use of the clutch can also cause excessive wear to the flywheel.
How long should a flywheel last?
A flywheel should last 80K miles or more. The truth is, the lifespan of a flywheel - or any components related to the clutch in a vehicle with a manual transmission - is almost entirely dependent on driving habits. Aggressive use of the clutch, hauling heavy loads, or pulling a trailer that exceeds the manufacturer’s recommendation can all limit the life of a flywheel. On the other hand, if proper care is taken, a flywheel could last the lifetime of the vehicle.
Can you drive with a damaged flywheel?
Although you can sometimes drive with a damaged flywheel, this will often lead to more serious damage to surrounding components. If a flywheel is warped and vibrating, for example, it could ruin the engine crankshaft or rear main bearing in the engine - which is far more expensive to replace than just a flywheel.

We help you search, schedule, and save on your car’s maintenance and repair.

With CarAdvise, you can save 10-40% on your vehicle maintenance and repair.

Partner with trusted auto repair shops like Firestone, Pep Boys and Jiffylube offering CarAdvise at over 26,000 shops nationwide:

Trusted by over 1 Million users

When you book with CarAdvise, get access to our ASE trained techs to answer any questions you have about your repair.

We help you save money

We guarantee that any service you book through us will cost you less than any retail price you can find.

We guarantee our work

12 Month, 12,000 Mile Warranty on every service booked through CarAdvise.