A Knock Sensor Replacement cost in Los Angeles in 2024

The average cost for a knock sensor replacement with CarAdvise is $257 and the range is generally between $113 and $403.

Get expert advice, find shops, schedule, approve, & pay for any service - guaranteed to be lower than in-store retail price.

Get your vehicle's inside scoop without the mumbo jumbo.

Lower than retail price

Guaranteed or 5% back

We've got your back

12k/12mo Warranty

Peace of mind

14-Day Assurance

AVERAGE COST IN Los Angeles

A Knock Sensor Replacement costs by shop in Los Angeles.

CarAdvise Customers save an average of $51 on A Knock Sensor Replacement.

POPULAR VEHICLES

Average cost of A Knock Sensor Replacement for popular vehicle models in Los Angeles:

Car Model

Avg. cost

$50

THE IMPORTANCE OF A Knock Sensor Replacement

What is a knock sensor and how does it work?

A knock sensor is a device inside your engine that detects the symptoms of pre-detonation, a condition that occurs when the mixture of air and fuel inside a combustion chamber ignites sooner than it is supposed to. Another name for predetonation is “engine knock”.

Your engine is constantly going through four distinct cycles - intake, where each piston in its turn moves downward, drawing air and fuel into the combustion chamber; compression, where the piston moves back up to compress the fuel vapor; combustion, where the spark plug ignites the compressed air and fuel, causing a rapid expansion of gas that drives the piston downward; and exhaust, where the piston moves up again, expelling the byproducts of combustion out through the exhaust system.

If the timing of the combustion cycle (also known as the “ignition” or “power” cycle) is off, the result can be poor fuel efficiency, a reduction in engine power, and even serious internal engine damage. Fortunately, when pre-detonation or pre-ignition occurs, vibrations associated with the event can be felt by the knock sensor. The sensor then communicates with the engine control module (the computer that manages engine function) that adjusts ignition timing, air/fuel mixture, and other engine factors to correct the problem.

COMMON SYMPTOMS

How do I know if my vehicle needs a new knock sensor?

The most common sign of a bad knock sensor is when the check engine light comes on. Not only does the knock sensor continuously monitor the engine for signs of vibration related to pre-detonation, but the engine control module that it communicates with continuously monitors the health of the sensor itself. Other common signs of a bad knock sensor include:

Pinging noises coming from the engine

A decline in engine power and performance

Decreased fuel efficiency

This text is only for demo

FREQUENCY OF INSPECTION

How does a technician perform A Knock Sensor Replacement ?

Replacing a knock sensor itself is not a particularly difficult task. It is usually bolted to the engine block and can be unfastened, unplugged, and removed. The new sensor is installed in its place. Access to the component, however, can be a far more involved process on many vehicles, making knock sensor replacement tricky.

For instance, it might be necessary for a technician to remove the entire intake assembly on top of your engine to access the knock sensor. The throttle body, intake plenum, hoses, wires, and more might need to be removed. Other vehicles might need to be raised and supported in the air so that the engine can be accessed from below. The starter assembly or other components might need to be removed to get to the knock sensor.


OTHER QUESTIONS CUSTOMERS ASK

Can a car run with a bad knock sensor?
A vehicle can usually run with a bad knock sensor, but it is certainly not recommended. The problems associated with the causes of a faulty knock sensor and those that the knock sensor is supposed to detect can lead to engine damage. For instance, pre-ignition can lead to piston damage, an expensive and time-consuming repair. If the knock sensor is bad, the condition might not be recognized in time to prevent such damage.
Can I replace my knock sensor myself?
It is not necessarily difficult to replace a knock sensor on some vehicles. The job can be as simple as unbolting and unplugging the device, extracting it from the engine, and installing the new component in its place. That said, the procedure to get to the knock sensor can be far more complicated, requiring other components to be removed for access. The starter, intake manifold, throttle body, or other parts might need to be removed. And your vehicle might need to be lifted and supported in the air to get to the underside of the engine.
What causes a knock sensor to go bad?
Several problems can cause the knock sensor to fail. Among these are worn out spark plugs, cracked spark plug or coil wires, or a bad ignition coil. If the sensor does fail, other problems can go undetected, such as engine misfire and internal damage.

This is demo Question

This is demo Answer

Compare discounted prices upfront at over 26,000 shops nationwide.

Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.

+ More

Join the world's largest consumer fleet.

Over 1.5 Million already have.