Mass Air Flow Sensor Replacement cost in Oakland Park in 2024

The average cost for mass air flow sensor replacement with CarAdvise is $257 and the range is generally between $66 and $444.

Get expert advice, find shops, schedule, approve, & pay for any service - guaranteed to be lower than in-store retail price.

Get your vehicle's inside scoop without the mumbo jumbo.

Lower than retail price

Guaranteed or 5% back

We've got your back

12k/12mo Warranty

Peace of mind

14-Day Assurance

AVERAGE COST IN Oakland Park

Mass Air Flow Sensor Replacement costs by shop in Oakland Park.

CarAdvise Customers save an average of $51 on Mass Air Flow Sensor Replacement.

POPULAR VEHICLES

Average cost of Mass Air Flow Sensor Replacement for popular vehicle models in Oakland Park:

Car Model

Avg. cost

$50

THE IMPORTANCE OF Mass Air Flow Sensor Replacement

What is a mass air flow sensor and how does it work?

A mass air flow sensor (MAF) is an electronic device installed in your engine’s air intake system. This sensor monitors the volume of air that goes into your engine across various operating conditions. On some vehicles, the mass air flow sensor also detects the incoming air temperature and pressure as well. The information from these readings is sent to the main engine computer, the Engine Control Module (ECM), where it is used to control factors such as the amount of fuel injected into the engine cylinders, the ignition and camshaft timing, and more, all to help your engine run as efficiently as possible.

COMMON SYMPTOMS

How do I know if my vehicle needs the mass air flow sensor replaced?

When a mass air sensor fails, the performance of your vehicle can suffer. Under certain conditions, it can also cause engine damage. Reduced fuel economy is likely as well. Your mass air flow sensor might be bad if you notice one or more of the following signs:

A reduction in fuel efficiency

A drop in engine power

Your engine stalls

Hesitation on acceleration

This text is only for demo

FREQUENCY OF INSPECTION

How does a technician perform Mass Air Flow Sensor Replacement ?

The mass air flow sensor is mounted in the air intake ducts that lead to the throttle body on top of your engine. It is often necessary for a technician to remove engine covers, shields, ducts, and other components for access to this component. The technician will also disconnect the negative terminal on your battery, taking care to preserve the vehicle computer memory. From there, the technician will take the following general steps:

  • Disconnect the electrical connecter attached to the mass air flow sensor
  • Remove the fasteners that attach the sensor to the ducts in which it is mounted
  • Dislodge the sensor and remove it from the ducts
  • Insert and fasten the new mass air flow sensor
  • Reconnect the wiring harness plug
  • Reinstall all components that were removed for access and the battery cable
  • Clear any diagnostic trouble codes (if necessary)
  • Test drive your vehicle to allow the sensor to reset itself (and to verify the repair)

OTHER QUESTIONS CUSTOMERS ASK

Is it better to clean or replace a mass air flow sensor?
Whether to clean or replace the mass air flow sensor is a decision best left to a qualified technician. Mass air flow sensors can show incorrect readings due to failure of the sensor itself, as well as the sensor simply being dirty. A technician may attempt to clean the sensor first and then recheck the sensor feedback with a scan tool, or the technician may recommend replacing the sensor if it is clear that the existing sensor is damaged or has internal issues.
How many miles does a mass air flow sensor last?
A mass air flow sensor may last anywhere from 80K-200K miles. However, this depends greatly on how well the engine air filter is maintained and in what type of environment the vehicle is driven. A vehicle used primarily in dusty or off-road environments may require cleaning and/or replacement of the mass air flow sensor more frequently.
What happens when a mass air flow sensor goes out?
If your mass air flow sensor goes bad, the Engine Control Module (ECM) will be unable to determine how much fuel is needed at any given time for your engine. That means your engine can run rich (too much fuel) or too lean (too little fuel). Both are detrimental to your engine. But if it runs lean for too long, serious engine damage can occur.

This is demo Question

This is demo Answer

Compare discounted prices upfront at over 26,000 shops nationwide.

Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.

+ More

Join the world's largest consumer fleet.

Over 1.5 Million already have.