Outer Tie Rod End Replacement cost in Elyria in 2023

The average cost for an outer tie rod end is $151 and the range is generally between $34 and $281.

Save 10-40% on your vehicle maintenance and repair. We can guarantee that any service you book through us will cost you less than any retail price you can find.

Not the right city? Click here

Our data is sourced from over 100,000 repairs and thousand of different repair shops, and reviewed by our ASE certified editorial team.

AVERAGE COST IN Elyria

Outer Tie Rod End Replacement costs by shop in Elyria.

CarAdvise Customers save an average of $30 on Outer Tie Rod End Replacement.

POPULAR VEHICLES

Average cost of Outer Tie Rod End Replacement for popular vehicle models in Elyria:

Honda Civic
Avg. cost
$323

Toyota Camry
Avg. cost
$218

Ford Escape
Avg. cost
$175

THE IMPORTANCE OF Outer Tie Rod End Replacement

What is a tie rod end and how does it work?

A tie rod end (sometimes referred to as an “outer tie rod end”) is a component of the steering system in a vehicle.

Your vehicle comes equipped with either a traditional steering gear box or a rack and pinion (a more common type of gearbox used on late model passenger vehicles) that is designed to transfer the movement of the steering wheel to the actual wheels on the ground.

When you turn the steering wheel, you are actually turning a shaft that reaches through the vehicle body. The steering shaft moves gears in the gearbox or the “steering rack” that, in turn, actuate a set of metal rods, the “tie rods”, to the left or right. A tie rod end is screwed onto the outermost part of each tie rod and connects the tie rod to the steering knuckle to which the wheel hub and wheel are bolted.

At the point at which a tie rod end connects to the steering knuckle is a ball-and-socket joint that accommodates the movement of the steering and suspension systems. Where it attaches to the tie rod, it is screwed on, making it adjustable so that a technician can adjust and align the wheels and tires.

COMMON SYMPTOMS

How do I know if my vehicle needs a new tie rod end?

Tie rods are susceptible to bending when a vehicle suffers an impact, such as with a pothole or a curb. Tie rod ends, on the other hand, are pretty sturdy and less prone to bending. The ball-and-socket joint on the tie rod end, however, is prone to damage and wear. If the protective rubber boot on the joint is cracked or ruptured, the grease that lubricates the joint can leak out or allow dirt and debris to enter. This leads to premature wear. A loose or broken joint in the tie rod end can result. When this happens, you might notice one or more of the following symptoms:

FREQUENCY OF INSPECTION

How does a technician perform Outer Tie Rod End Replacement ?

It is common for a technician to replace both the left and right tie rod ends as a pair. In fact, it is generally recommended to do so. To replace a tie rod end, a technician must first raise and support your vehicle in the air for access. With the tire and wheel removed, the technician will carefully mark the location of the tie rod end on the tie rod (the length of the tie rod) so that the new component can be installed in the same position as the old one. From there, a technician will perform the following steps:

Loosen the lock nut on the tie rod
Remove the cotter pin from the tie rod end ball stud (if applicable)
Remove the castle nut or other retaining nut
Using a special tool, separate the tie rod end ball joint from the steering knuckle
Unthread the tie rod end from the tie rod
Screw the new tie rod end onto the tie rod
Reattach the tie rod end to the steering knuckle and torque to manufacturer’s specification
Insert grease into the tie rod end ball joint (if applicable)
Snug up the lock nut
Replace the wheel(s) and tire(s)
Perform a wheel alignment (in most cases)

OTHER QUESTIONS CUSTOMERS ASK

Can you replace just one outer tie rod end?
While it is technically possible to replace a single tie rod end on a vehicle, it is not generally recommended. A common failure of a tie rod end is a worn out ball-and-socket joint, often caused by a lack of lubrication (leaking protective boot) or dirt in the joint. Since worn or damaged tie rod ends can lead to premature tire tread wear and a misaligned steering and suspension system, (or worse, a failed component and loss of steering), both sides should be replaced at the same time.
Can you drive with a broken outer tie rod end?
No. If an outer tie rod end is worn, it might be possible to drive your vehicle for a while. But then there is no telling when it will fail completely. If it is broken, you will be unable to steer your vehicle. The affected wheel and tire will not respond to the steering wheel. The same thing happens if a tie rod end breaks while you are driving.
Can a pothole damage the tie rod ends?
It is more common for the tie rod to become bent when you drive through a pothole than it is for the tie rod end to fail. In some cases, however, a bad run-in with a pothole can damage the ball-and-socket joint of the tie rod end and cause it to fail.

We help you search, schedule, and save on your car’s maintenance and repair.

With CarAdvise, you can save 10-40% on your vehicle maintenance and repair.

Partner with trusted auto repair shops like Firestone, Pep Boys and Jiffylube offering CarAdvise at over 26,000 shops nationwide:

Trusted by over 1 Million users

When you book with CarAdvise, get access to our ASE trained techs to answer any questions you have about your repair.

We help you save money

We guarantee that any service you book through us will cost you less than any retail price you can find.

We guarantee our work

12 Month, 12,000 Mile Warranty on every service booked through CarAdvise.