A Control Arm Bushings Replacement costs by shop in Burlington.
CarAdvise Customers save an average of $41 on A Control Arm Bushings Replacement.
Average cost of A Control Arm Bushings Replacement for popular vehicle models in Burlington:
Avg. cost $92
Avg. cost $149
Avg. cost $390
THE IMPORTANCE OF A Control Arm Bushings Replacement
What are control arm bushings and how do they work?
Control arm bushings are part of a control arm, a major component of your car’s suspension system. The control arm is connected on its outer end to a wheel (by way of the steering knuckle and wheel hub). On the inner end, the control arm is bolted to the vehicle body or frame through a pair of rubber bushings. When the wheel moves up and down over bumps, or when responding to weight shifts when you turn, the control arm moves up and down with the wheel. The bushings allow the control arm to pivot while absorbing vibration.
What are signs that the control arm bushings need to be replaced?
The control arm bushings are subject to a lot of twisting every time you turn or drive over a bump in the road. When the bushings wear out, there are a few signs that they need to be replaced. You might hear a squeaking or creaking sound when going over bumps. If worn to the point that metal-to-metal contact is made between the control arm and the body or frame, you might hear a knocking sound instead. And if severely worn, control arm bushings might affect the tires. Look for signs of uneven tire tread wear.
This text is only for demo
FREQUENCY OF INSPECTION
How does a technician perform A Control Arm Bushings Replacement ?
The procedure to replace control arm bushings depends, to some degree, on the type of vehicle, whether it is an upper or lower control arm, and whether it is located at the front or rear of the vehicle. In general, to replace lower control arm bushings on the front of a typical car or light SUV, a mechanic will do the following:
Lift and support your vehicle and remove the wheel and tire for access
Disconnect the sway bar link (if applicable)
Disconnect and separate the ball joint from the steering knuckle (this may require that the knuckle be disconnected from its upper mount)
Unbolt the inner control arm mounts from the body or frame and remove the control arm
Using a press, extract the control arm bushings from the control arm
Press the new bushings into the control arm
Reinstall the control arm, starting start the bolts through the bushings
Connect the ball joint to the steering knuckle
Reattach the sway bar link to the control arm (if applicable)
Load the suspension and torque the inner control arm mounting bolts
Replace the wheel and tire, lower the vehicle, and test drive to verify the repair
OTHER QUESTIONS CUSTOMERS ASK
Can you drive with a broken control arm bushing?
A control arm is the connection between your tires and your vehicle. If it is compromised, not only will your ride quality be diminished, but the safety of your vehicle will be as well. A squeaking bushing is no great concern, but a failed bushing can be serious. If you notice any of the signs of a bad control arm bushing, make sure to have your suspension evaluated by a trusted technician as soon as possible.
What happens if control arm bushings are bad?
The control arm bushings are made of rubber in order to prevent metal-to-metal contact between the control arm and its mounting brackets on the body or frame of your vehicle. They also dampen vibrations caused when you drive over bumps. When these bushings wear away, the wheel alignment, vehicle handling, and tire wear can all suffer.
What makes control arm bushings go bad?
Control arm bushings are subject to an immense amount of vibration and stress. They are constantly twisting and turning in response to your vehicle driving over bumps and around turns. Friction, stress, and time all lead to deterioration, as does excessive heat.
This is demo Question
This is demo Answer
Compare discounted prices upfront at over 26,000 shops nationwide.
Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.
Our digital platform is designed to make maintaining and repairing your vehicle a breeze – from conveniently scheduling services, finding shops in the area, approving work remotely or getting free expert advice so you can be confident about any decision.
How much does CarAdvise cost?
There’s nothing to pay up-front; you simply only pay for repairs or services that you approve.
Are there any additional fees?
Nope, no funny business here—just get the job done and pay for what you approve. It really is that simple.
Are there shops available in my area?
With our handy nationwide network of over 26,000 shops to choose from and free sign-up – you can rest assured your car is in good hands.
How does CarAdvise pricing work?
With CarAdvise, you don’t need a fleet of 100,000 cars to get an amazing deal on car services. Our discounted prices are guaranteed to beat any other retail options – so why spend more? On average customers save 15-40% when they choose us – that could mean hundreds saved in just one service job.
At CarAdvise, we believe life is unpredictable and if you need to reschedule or cancel an appointment – no worries! We promise there’s never any penalty for missed appointments.
What shops do you work with?
We’ve partnered with the best in the industry such as Firestone, Pep Boys, JiffyLube, Canadian Tire, NTB, Meineke, Tire Kingdom, AAMCO, Monro, FCA dealerships and many independent shops across the country.
How do I sign up?
Ready to join the party? Just a few clicks and you’ll be all set – create your account now. You can easily create your account here.
How do I get more help?
Just email us at [email protected] or give our friendly team a ring at (844) 923-8473 and we’ll be sure to lend you the helping hand you need.