A Control Arm Bushings Replacement cost in Oakland Park in 2024

The average cost for a suspension control arm bushings replacement with CarAdvise is $265 and the range is generally between $96 and $529.

Get expert advice, find shops, schedule, approve, & pay for any service - guaranteed to be lower than in-store retail price.

Get your vehicle's inside scoop without the mumbo jumbo.

Lower than retail price

Guaranteed or 5% back

We've got your back

12k/12mo Warranty

Peace of mind

14-Day Assurance

AVERAGE COST IN Oakland Park

A Control Arm Bushings Replacement costs by shop in Oakland Park.

CarAdvise Customers save an average of $53 on A Control Arm Bushings Replacement.

POPULAR VEHICLES

Average cost of A Control Arm Bushings Replacement for popular vehicle models in Oakland Park:

Car Model

Avg. cost

$50

THE IMPORTANCE OF A Control Arm Bushings Replacement

What are control arm bushings and how do they work?

Control arm bushings are part of a control arm, a major component of your car’s suspension system. The control arm is connected on its outer end to a wheel (by way of the steering knuckle and wheel hub). On the inner end, the control arm is bolted to the vehicle body or frame through a pair of rubber bushings. When the wheel moves up and down over bumps, or when responding to weight shifts when you turn, the control arm moves up and down with the wheel. The bushings allow the control arm to pivot while absorbing vibration.

COMMON SYMPTOMS

What are signs that the control arm bushings need to be replaced?

The control arm bushings are subject to a lot of twisting every time you turn or drive over a bump in the road. When the bushings wear out, there are a few signs that they need to be replaced. You might hear a squeaking or creaking sound when going over bumps. If worn to the point that metal-to-metal contact is made between the control arm and the body or frame, you might hear a knocking sound instead. And if severely worn, control arm bushings might affect the tires. Look for signs of uneven tire tread wear.

This text is only for demo

FREQUENCY OF INSPECTION

How does a technician perform A Control Arm Bushings Replacement ?

The procedure to replace control arm bushings depends, to some degree, on the type of vehicle, whether it is an upper or lower control arm, and whether it is located at the front or rear of the vehicle. In general, to replace lower control arm bushings on the front of a typical car or light SUV, a mechanic will do the following:

  • Lift and support your vehicle and remove the wheel and tire for access
  • Disconnect the sway bar link (if applicable)
  • Disconnect and separate the ball joint from the steering knuckle (this may require that the knuckle be disconnected from its upper mount)
  • Unbolt the inner control arm mounts from the body or frame and remove the control arm
  • Using a press, extract the control arm bushings from the control arm
  • Press the new bushings into the control arm
  • Reinstall the control arm, starting start the bolts through the bushings
  • Connect the ball joint to the steering knuckle
  • Reattach the sway bar link to the control arm (if applicable)
  • Load the suspension and torque the inner control arm mounting bolts
  • Replace the wheel and tire, lower the vehicle, and test drive to verify the repair

OTHER QUESTIONS CUSTOMERS ASK

Can you drive with a broken control arm bushing?
A control arm is the connection between your tires and your vehicle. If it is compromised, not only will your ride quality be diminished, but the safety of your vehicle will be as well. A squeaking bushing is no great concern, but a failed bushing can be serious. If you notice any of the signs of a bad control arm bushing, make sure to have your suspension evaluated by a trusted technician as soon as possible.
What happens if control arm bushings are bad?
The control arm bushings are made of rubber in order to prevent metal-to-metal contact between the control arm and its mounting brackets on the body or frame of your vehicle. They also dampen vibrations caused when you drive over bumps. When these bushings wear away, the wheel alignment, vehicle handling, and tire wear can all suffer.
What makes control arm bushings go bad?
Control arm bushings are subject to an immense amount of vibration and stress. They are constantly twisting and turning in response to your vehicle driving over bumps and around turns. Friction, stress, and time all lead to deterioration, as does excessive heat.

This is demo Question

This is demo Answer

Compare discounted prices upfront at over 26,000 shops nationwide.

Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.

+ More

Join the world's largest consumer fleet.

Over 1.5 Million already have.