A Valve Replacement cost in Spartanburg in 2023

Get expert advice, find shops, schedule, approve, & pay for any service - guaranteed to be lower than in-store retail price.

Get your vehicle's inside scoop without the mumbo jumbo.

Lower than retail price

Guaranteed or 5% back

We've got your back

12k/12mo Warranty

Peace of mind

14-Day Assurance


A Valve Replacement costs by shop in Spartanburg.

CarAdvise Customers save an average of $0 on A Valve Replacement.


Average cost of A Valve Replacement for popular vehicle models in Spartanburg:

Car Model

Avg. cost


THE IMPORTANCE OF A Valve Replacement

What is a valve and how does it work?

A valve - often referred to as either an “intake” valve or an “exhaust” valve, depending on its function - is a device inside an internal combustion engine. The valve opens and closes in time with the internal rotation of the engine when it is running, as a result of the rotating action of the camshaft(s) connected (by way of the timing belt/chain) to the crankshaft. The intake valve opens at one point in the combustion process in order to allow fuel and air into the combustion chamber to be burned. The exhaust valve opens, in turn, to allow exhaust gases to escape the cylinder after the completed combustion event and make their way into the exhaust pipe.

A valve looks something like a disc on the end of a long, thin rod (the “valve stem”), and it is typically made of a hardened steel that allows it to be exposed to extreme temperature and compression. On a modern overhead cam engine, there can be as many as thirty two valves.


How do I know if a valve needs to be replaced?

A valve might need replacement for a number of reasons, from a worn and leaky valve seat to a sticking valve covered with carbon, or even a bent valve resulting from some other engine issue. If you notice any of the following signs, a thorough inspection might reveal that one or more valves need to be replaced:

Your Check Engine Light comes on and reveals a diagnostic trouble code related to engine performance

You notice a loss of horsepower or a drop in fuel economy

You see blue smoke coming from the exhaust pipe

Your engine consumes an unusually large amount of oil

This text is only for demo


How does a technician perform A Valve Replacement ?

Valve replacement is a highly complex job requiring special tools and experience. In some cases, valves might be able to be repaired, such as when the stems are intact and only the face is worn or coated with carbon. If the valve stem is damaged, the valve needs to be replaced. In most cases, due to the relatively low cost of valves, a technician will recommend replacement over repair. To replace a valve (or set of valves), a technician will typically perform the following:

  • Remove the engine valve cover(s)
  • Unbolt and remove the cylinder head
  • Using special tools, disassemble the cylinder head to remove the valves
  • Insert the new valves, reassemble and reinstall the cylinder head, and replace the valve cover
  • Some engines may require that the intake manifold(s), timing chain, and camshaft(s) also be removed in order to access the cylinder head. The valves will also need to be adjusted for proper engine function.


What causes engine valve damage?
Damage to the valves is often caused by a timing belt or chain that breaks while the engine is running. If this happens on what is known as an “interference engine”, the results can be catastrophic when the speeding valves contact the moving pistons. Valves also wear out naturally as an engine ages.
How can you tell if a valve is bad?
There are multiple signs of a bad valve. The first signs of a worn or stuck valve are often a loss of engine horsepower and/or fuel efficiency accompanied by a Check Engine Light and a misfire. A bad valve can also be detected with a compression test.
Can you replace a valve without removing the cylinder head?
While it is possible to remove and replace some of the components of a valvetrain - such as lifters, springs, valve seats, and rocker arms - without removing the cylinder head from the engine, in order to replace the valves, the head must be removed. That is because the valves exit the cylinder head from the side facing the combustion chamber deep inside the engine.

This is demo Question

This is demo Answer

Compare discounted prices upfront at over 26,000 shops nationwide.

Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.

+ More

Join the world's largest consumer fleet.

Over 1.5 Million already have.

Questions? We've got answers.

Our digital platform is designed to make maintaining and repairing your vehicle a breeze – from conveniently scheduling services, finding shops in the area, approving work remotely or getting free expert advice so you can be confident about any decision.

There’s nothing to pay up-front; you simply only pay for repairs or services that you approve. 

Nope, no funny business here—just get the job done and pay for what you approve. It really is that simple.

With our handy nationwide network of over 26,000 shops to choose from and free sign-up – you can rest assured your car is in good hands. 

With CarAdvise, you don’t need a fleet of 100,000 cars to get an amazing deal on car services. Our discounted prices are guaranteed to beat any other retail options – so why spend more? On average customers save 15-40% when they choose us – that could mean hundreds saved in just one service job.

Learn More

At CarAdvise, we believe life is unpredictable and if you need to reschedule or cancel an appointment – no worries! We promise there’s never any penalty for missed appointments.

We’ve partnered with the best in the industry such as Firestone, Pep Boys, JiffyLube, Canadian Tire, NTB, Meineke, Tire Kingdom, AAMCO, Monro, FCA dealerships and many independent shops across the country.

Ready to join the party? Just a few clicks and you’ll be all set – create your account now. You can easily create your account here.

Just email us at [email protected] or give our friendly team a ring at (844) 923-8473 and we’ll be sure to lend you the helping hand you need.