A Water Pump Replacement cost in Lima in 2023

The average cost for a water pump replacement with CarAdvise is $380 and the range is generally between $165 and $817.

Get expert advice, find shops, schedule, approve, & pay for any service - guaranteed to be lower than in-store retail price.

Get your vehicle's inside scoop without the mumbo jumbo.

Lower than retail price

Guaranteed or 5% back

We've got your back

12k/12mo Warranty

Peace of mind

14-Day Assurance


A Water Pump Replacement costs by shop in Lima.

CarAdvise Customers save an average of $76 on A Water Pump Replacement.


Average cost of A Water Pump Replacement for popular vehicle models in Lima:

Car Model

Avg. cost


THE IMPORTANCE OF A Water Pump Replacement

What is a water pump and how does it work?

A water pump is part of the cooling system that helps to control the temperature of your engine.

The combustion process, along with friction from all of the moving parts inside of an engine, produces a good deal of heat. While a certain amount of heat is necessary for proper engine function, too much can cause damage. Therefore, a mixture of water and engine coolant (also known as “antifreeze”) is circulated through passageways inside of the engine block. There, the coolant absorbs some of the heat before it is forced out of the engine and through a network of thin tubes inside the radiator. Air passing through the radiator allows the heat to dissipate into the environment before the coolant returns once again to the engine to pick up more heat.

The water pump is the device that makes the circulation of coolant possible. Inserted into the cooling system, the pump forces the fluid through all of the hoses, the radiator, the engine, and more. Even the heater inside the passenger compartment relies on the water pump as some of the heated coolant is diverted into the cabin and expelled through the heater core.

On most engines, the water pump is mounted to the outside of the engine block and is driven by the serpentine belt that runs around the water pump pulley. On many newer engines, though, the water pump is driven by the timing belt (or chain) inside the engine.


How do I know if my vehicle needs a new water pump?

The water pump is a critical component in the cooling system for your engine. If the water pump stops working, so does the cooling system. Therefore, it is important to address the problem of a bad water pump as soon as possible. While the symptoms of a failing water pump mirror those of other components, such as a bad engine thermostat or leaking radiator, you can suspect the water pump if you notice one or more of the following signs:

A coolant leak coming from the front of your engine (right side of the engine compartment on vehicles with transverse-mounted engines)

The syrupy smell of engine coolant

A grinding or clattering noise coming from the water pump shaft bearing when the engine is running

Engine overheating

This text is only for demo


How does a technician perform A Water Pump Replacement ?

The procedure for replacing a water pump depends on how difficult it might be to access the component. More than that, it depends on whether the pump is external and driven by the serpentine belt or internal and driven by the timing belt or timing chain. In the latter case, significant disassembly is necessary, including removal of the crankshaft pulley, timing cover(s), timing belt tensioner(s), and the timing belt itself. This service can be quite involved, which is why repair shops recommend replacing the water pump whenever the timing belt or chain is replaced as part of routine vehicle maintenance.

If, on the other hand, the water pump is mounted to the outside of your engine, the process is a bit simpler. The technician must first remove any covers and components blocking access to the serpentine belt and water pump. Some of the coolant in the cooling system might need to be drained off. The serpentine belt must be removed. The coolant hoses connected to the water pump are removed as well. Once the pump is unbolted from the engine block, the old pump is taken away, the mounting surface on the engine is cleaned of old sealant, new sealant is applied, and the new pump is installed. The mounting bolts are torqued to manufacturer’s specifications, and the serpentine belt is reinstalled.

Regardless of which type of water pump your engine features, any lost coolant must be replaced and the system must be bled of trapped air before your vehicle can be placed back into service.


Is changing a water pump a big job?
The level of difficulty and the time required to replace a water pump depends a great deal on access to the component. Older vehicles with forward mounted engines and lots of space to work in were much simpler to work on when it came to replacing a water pump. Today’s modern vehicles have very little working space inside the engine compartment, and some water pumps are not easy to get at. That is especially true with an engine that features an internal water pump driven by the timing belt or timing chain. In that case, the front part of the engine must be disassembled and the timing belt/chain removed to replace the water pump.
What causes a water pump to go bad?
A common cause of water pump failure is a compromised shaft bearing inside the water pump. The impeller can also break on occasion. A seal or gasket can deteriorate and cause a leak, and a loose pulley can cause internal damage. Other causes that can lead to a bad water pump include a misaligned serpentine belt, bent pulley, or contamination inside the coolant.
Can I drive with a broken water pump?
It is not recommended to drive with a bad water pump. If the pump is merely leaking, you might be able to drive it to a repair shop without causing further damage. But if the pump fails altogether, which usually results in engine overheating, you should not drive your vehicle at all. Overheating can lead to catastrophic (and expensive) engine damage. Have your vehicle towed instead.

This is demo Question

This is demo Answer

Compare discounted prices upfront at over 26,000 shops nationwide.

Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.

+ More

Join the world's largest consumer fleet.

Over 1.5 Million already have.

Questions? We've got answers.

Our digital platform is designed to make maintaining and repairing your vehicle a breeze – from conveniently scheduling services, finding shops in the area, approving work remotely or getting free expert advice so you can be confident about any decision.

There’s nothing to pay up-front; you simply only pay for repairs or services that you approve. 

Nope, no funny business here—just get the job done and pay for what you approve. It really is that simple.

With our handy nationwide network of over 26,000 shops to choose from and free sign-up – you can rest assured your car is in good hands. 

With CarAdvise, you don’t need a fleet of 100,000 cars to get an amazing deal on car services. Our discounted prices are guaranteed to beat any other retail options – so why spend more? On average customers save 15-40% when they choose us – that could mean hundreds saved in just one service job.

Learn More

At CarAdvise, we believe life is unpredictable and if you need to reschedule or cancel an appointment – no worries! We promise there’s never any penalty for missed appointments.

We’ve partnered with the best in the industry such as Firestone, Pep Boys, JiffyLube, Canadian Tire, NTB, Meineke, Tire Kingdom, AAMCO, Monro, FCA dealerships and many independent shops across the country.

Ready to join the party? Just a few clicks and you’ll be all set – create your account now. You can easily create your account here.

Just email us at [email protected] or give our friendly team a ring at (844) 923-8473 and we’ll be sure to lend you the helping hand you need.