A Wheel Bearing Replacement cost in Vineland in 2023

The average cost for a wheel bearing replacement with CarAdvise is $310 and the range is generally between $237 and $659.

Get expert advice, find shops, schedule, approve, & pay for any service - guaranteed to be lower than in-store retail price.

Get your vehicle's inside scoop without the mumbo jumbo.

Lower than retail price

Guaranteed or 5% back

We've got your back

12k/12mo Warranty

Peace of mind

14-Day Assurance


A Wheel Bearing Replacement costs by shop in Vineland.

CarAdvise Customers save an average of $62 on A Wheel Bearing Replacement.


Average cost of A Wheel Bearing Replacement for popular vehicle models in Vineland:

Car Model

Avg. cost


THE IMPORTANCE OF A Wheel Bearing Replacement

What is a wheel bearing and how does it work?

A wheel bearing is the name given to a set of steel bearings that allow the wheels on your vehicle to spin with the least amount of friction possible. The wheel bearing assembly, made up of many small steel balls or rollers, is housed inside of the wheel hub to which the wheel attaches. Depending on the type of drive system included on your vehicle, the drive axle might also protrude through the center of the hub and bearing.

Wheel bearings reduce friction and allow your vehicle to roll by offering smooth balls or rollers to ride against the smooth metal walls of the inner and outer rings, or “races” of the bearing assembly. These metal balls or rollers bear the weight of your vehicle. The arrangement is similar to the ball bearings in a roller skate or skateboard.

Older vehicles relied on a set of “tapered” roller bearings installed in the wheel hub and seated on a spindle. This type of wheel bearing has the advantage of better lubrication and smooth operation, but requires more maintenance and can be tricky to install. While some heavy duty trucks still come with tapered wheel bearings, most modern vehicles feature sealed wheel bearings, some of which must be pressed into the wheel hub, and others that come as a permanent part of the hub assembly.


What are the signs that my vehicle needs a new wheel bearing?

Wheel bearings are filled with grease for lubrication. When this lubricant leaks from the wheel bearing, metal on metal contact can damage the wheel bearing. So can the introduction of dirt, sand, or other contaminants. If allowed to deteriorate for too long, significant changes to vehicle handling are likely. Ultimately, complete failure of the wheel hub (where the wheel falls off of the vehicle) can occur.

You might notice one or more of the following signs if a wheel bearing is going bad:

Gentle roaring or rumbling sound coming from the wheels, especially as you make turns or travel around corners

Vibration felt in the steering wheel

Vehicle pulls to one side

Uneven tire wear

This text is only for demo


How does a technician perform A Wheel Bearing Replacement ?

Wheel bearing replacement procedures depend on the vehicle make, model, drive type (front-wheel, rear-wheel, all-wheel, or four-wheel-drive) and other factors, including whether the vehicle comes with tapered bearings or sealed bearings. The most common type of wheel bearing found on passenger vehicles today is the sealed bearing. To replace this component, a technician will take the following general steps:

  • Raise and support your vehicle in the air for access to the suspension system
  • Remove the wheel and tire
  • Remove the wheel speed sensor
  • Disassemble brake caliper and remove caliper bracket
  • Detach the outer tie rod end from the knuckle (some applications)
  • Detach the knuckle or ball joint from the lower control arm
  • Unfasten the axle retaining nut
  • Remove the bolts securing the knuckle to the strut assembly
  • Remove the hub dust cover from the knuckle (some models)
  • Remove the bearing retaining clip
  • Remove the wheel bearing assembly from the knuckle using a hydraulic press (some applications)
  • Press the new wheel bearing into the knuckle (where necessary)
  • Install dust shield and press hub into bearing and knuckle
  • Reinstall all components in the vehicle
  • It should be noted that, when the wheel bearing is pressed into the knuckle, the inner bearing race must be forcibly removed from the wheel hub without causing damage before the hub can be pressed into the new bearing. Not all vehicles require that the wheel bearing be pressed into place; some vehicle feature bolt-on hubs with permanently-installed bearings


Can you drive a car with a bad wheel bearing?
It is not recommended that you drive with a bad wheel bearing. While it may be possible to drive for a short period, it is difficult to know at what point the damage becomes serious. Not only can a bad wheel bearing affect vehicle handling, if wheel bearing becomes significantly worn or damaged, more damage can occur to other components, such as the wheel hub, spindle, CV joint, or even the transmission. And ultimately, because the wheel bearing is the tie between the wheel hub and the rest of the vehicle, if it fails completely, your wheel can fall off while you are driving.
How long can I drive on a bad wheel bearing?
It is difficult to say how long a bad wheel bearing might continue to work. If you notice signs of a bad wheel bearing - growling or grinding, vibration, loose handling, or the like - you should have your vehicle’s suspension system inspected as soon as possible. Deterioration can escalate quickly and leave you stranded, or worse, cause you to lose control of your vehicle.
Is it okay to replace only one wheel bearing?
When it comes to sealed wheel bearings, these components are designed to last the lifetime of your vehicle. While they do not always make it that far, some needing replacement before 100K miles, still they only need to be replaced if and when they show signs of failure. Therefore, while some other components should always be replaced in pairs - the ball joints, struts, shocks, and others - wheel bearings can be replaced independently.

This is demo Question

This is demo Answer

Compare discounted prices upfront at over 26,000 shops nationwide.

Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.

+ More

Join the world's largest consumer fleet.

Over 1.5 Million already have.

Questions? We've got answers.

Our digital platform is designed to make maintaining and repairing your vehicle a breeze – from conveniently scheduling services, finding shops in the area, approving work remotely or getting free expert advice so you can be confident about any decision.

There’s nothing to pay up-front; you simply only pay for repairs or services that you approve. 

Nope, no funny business here—just get the job done and pay for what you approve. It really is that simple.

With our handy nationwide network of over 26,000 shops to choose from and free sign-up – you can rest assured your car is in good hands. 

With CarAdvise, you don’t need a fleet of 100,000 cars to get an amazing deal on car services. Our discounted prices are guaranteed to beat any other retail options – so why spend more? On average customers save 15-40% when they choose us – that could mean hundreds saved in just one service job.

Learn More

At CarAdvise, we believe life is unpredictable and if you need to reschedule or cancel an appointment – no worries! We promise there’s never any penalty for missed appointments.

We’ve partnered with the best in the industry such as Firestone, Pep Boys, JiffyLube, Canadian Tire, NTB, Meineke, Tire Kingdom, AAMCO, Monro, FCA dealerships and many independent shops across the country.

Ready to join the party? Just a few clicks and you’ll be all set – create your account now. You can easily create your account here.

Just email us at [email protected] or give our friendly team a ring at (844) 923-8473 and we’ll be sure to lend you the helping hand you need.