A Drive Belt Tensioner Replacement cost in Peachtree Corners in 2024

The average cost for a drive belt tensioner replacement with CarAdvise is $223 and the range is generally between $82 and $386.

Get expert advice, find shops, schedule, approve, & pay for any service - guaranteed to be lower than in-store retail price.

Get your vehicle's inside scoop without the mumbo jumbo.

Lower than retail price

Guaranteed or 5% back

We've got your back

12k/12mo Warranty

Peace of mind

14-Day Assurance

AVERAGE COST IN Peachtree Corners

A Drive Belt Tensioner Replacement costs by shop in Peachtree Corners.

CarAdvise Customers save an average of $45 on A Drive Belt Tensioner Replacement.


Average cost of A Drive Belt Tensioner Replacement for popular vehicle models in Peachtree Corners:

Car Model

Avg. cost


THE IMPORTANCE OF A Drive Belt Tensioner Replacement

What is a drive belt tensioner and how does it work?

The rubber drive belt on your vehicle allows the engine to provide power for a number of systems. Attached to the engine are a power steering pump, alternator, air conditioning compressor, and (in some cases) a water pump. Each of these components has a pulley on the front. Snaking around the pulleys is the drive belt, also known as a “serpentine belt”. Now, a device is in place to keep tension on the belt. This drive belt tensioner might need to be adjusted to provide a particular amount of tension, it might be spring-tensioned, or it might operate by hydraulic pressure. In any case, the job of the drive belt tensioner is to make sure that the serpentine belt does not become loose as it turns all of the pulleys.


Signs that your drive belt tensioner needs to be replaced

When a drive belt tensioner is failing, there are certain signs that might alert you to its condition. If your vehicle has a manually-adjusted tensioner, some of these signs could also suggest that it needs to be adjusted. These signs include:

Squealing noise coming from the front of your engine that raises in pitch with engine RPMs

The belt comes off of its pulleys

Your battery warning light comes on

The drive belt flutters or tracks in an off-centered manner

This text is only for demo


How does a technician perform A Drive Belt Tensioner Replacement ?

Drive belt tensioner replacement first requires access to the front of your vehicle's engine. That might include removing shields or guards or disconnecting engine accessories. With the belt and tensioner in clear view, a mechanic will typically do the following:

  • Release any tension from the drive belt tensioner by either loosening the tension bolt or turning against the tension with a special service tool
  • Taking care to note the routing of the serpentine belt in advance, remove the belt from the engine
  • Unbolt the old tensioner and remove it from its mounting location
  • Install the new tensioner and torque the mounting bolts to the manufacturer’s specifications
  • Inspect all other related components for signs of wear
  • Reinstall drive belt and load tensioner
  • Reinstall any components that were removed for access


What happens if a belt tensioner goes bad?
A loose or seized drive belt tensioner can cause your drive belt to break or come off of the engine. When that happens, you will likely lose important functions of your vehicle. For instance, if you are driving, you could lose power steering assist, something that can be dangerous if you happen to be turning through an intersection at the time. Also, your alternator would no longer be operational, so your engine would eventually stall out for lack of electrical power. And your battery would die. Because the drive belt powers the water pump on some engines, dangerous overheating could be another result of a failed drive belt tensioner.
What causes a drive belt tensioner to go bad?
The drive belt, or “serpentine belt” on your vehicle is moved by the engine crankshaft. That means, whenever your engine is running, so is the drive belt and all of the pulleys that it engages. Therefore, the belt tensioner sees an enormous amount of use. Eventually, the tensioner pulley bearings give out. Sometimes the tensioner mechanism, whether screw-type, spring-tensioned, or hydraulic, gives way. Excessive dirt and dust can cause premature wear.
How long can you drive with a bad tensioner pulley?
If a drive belt tensioner is going bad, the resulting damage - namely a broken or thrown belt - might not be immediate. But they might be. If you suspect that the belt tensioner is going bad, or any other drive belt component, such as another pulley, is failing, make sure to have it inspected and replaced as soon as possible to avoid a potentially dangerous loss of vehicle function.

This is demo Question

This is demo Answer

Compare discounted prices upfront at over 26,000 shops nationwide.

Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.

+ More

Join the world's largest consumer fleet.

Over 1.5 Million already have.