An EGR Vacuum Solenoid Replacement cost in Morgan Hill in 2023

Get expert advice, find shops, schedule, approve, & pay for any service - guaranteed to be lower than in-store retail price.

Get your vehicle's inside scoop without the mumbo jumbo.

Lower than retail price

Guaranteed or 5% back

We've got your back

12k/12mo Warranty

Peace of mind

14-Day Assurance


An EGR Vacuum Solenoid Replacement costs by shop in Morgan Hill.

CarAdvise Customers save an average of $0 on An EGR Vacuum Solenoid Replacement.


Average cost of An EGR Vacuum Solenoid Replacement for popular vehicle models in Morgan Hill:

Car Model

Avg. cost


THE IMPORTANCE OF An EGR Vacuum Solenoid Replacement

What is an EGR vacuum solenoid and how does it work?

The exhaust gas recirculation, or “EGR", system on your vehicle serves to reduce engine emissions by introducing or “recirculating” a small amount of exhaust gas from the exhaust system back to the engine intake. This helps to burn away any fuel that was not completely burnt during the combustion process. It also reduces the level of oxygen that enters the engine cylinders, thereby reducing combustion temperatures and reducing harmful nitrogen oxide. The result is a more efficient engine with fewer hydrocarbon emissions.

The EGR vacuum solenoid is an electronically controlled vacuum valve that distributes engine vacuum to the EGR valve when called upon by the vehicle’s computer, the engine control module (or ECM).


How do I know if my vehicle needs a new EGR vacuum solenoid?

In some cases, you might not immediately notice signs of a bad EGR vacuum solenoid. Symptoms can vary depending on whether the solenoid fails to open properly or close properly. If your EGR vacuum solenoid fails, you might notice the following signs:

Your engine runs roughly, hesitates, or stalls upon acceleration

You hear the engine knocking or “pinging”, a sign of pre-ignition

The check engine light comes on

This text is only for demo


How does a technician perform An EGR Vacuum Solenoid Replacement ?

The EGR vacuum solenoid can be located either on the engine, near the engine, or on the firewall behind the engine. Therefore, a technician will likely remove the upper engine cover for access. Other wires, hoses, or components might need to be moved as well. It is common to disconnect the negative cable on the battery, taking care to preserve the vehicle computer memory. From there, the technician will disconnect the vacuum lines connected to the solenoid and unplug the electrical wire connector. The solenoid is removed from the vehicle by unfastening the retaining screw, bolt, or clip.

Once the new EGR vacuum solenoid has been secured in place, the electrical plug and vacuum lines are reconnected. All other components that were moved or removed for access are put back into place and the solenoid is tested for proper operation. The technician might need to clear the diagnostic code from the ECM using a scan tool. Your vehicle will likely be road tested as well.


Is an EGR valve the same as an EGR vacuum solenoid?
No, the EGR vacuum solenoid is an electronically-operated valve that distributes vacuum from the engine to the EGR valve whenever the vehicle computer, the engine control module (ECM) commands it. The two devices work in tandem to reduce combustion temperatures and harmful emissions.
Can I drive with a bad EGR vacuum solenoid?
If the EGR vacuum solenoid is not working properly, you might notice little difference to the drivability of your vehicle. On the other hand, you might find that your engine runs roughly, hesitates, stalls, misfires, and more. Your vehicle might not pass an emissions test. At the very least, driving with this condition leads to increased levels of hydrocarbons emitted from the exhaust.
What damage can a faulty EGR valve cause?
A bad EGR valve can lead to drivability issues, such as engine knock (pinging), misfire, stalling, and more. Over an extended period of time, internal engine damage can occur. Therefore, this problem should be checked out by a trained technician.

This is demo Question

This is demo Answer

Compare discounted prices upfront at over 26,000 shops nationwide.

Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.

+ More

Join the world's largest consumer fleet.

Over 1.5 Million already have.

Questions? We've got answers.

Our digital platform is designed to make maintaining and repairing your vehicle a breeze – from conveniently scheduling services, finding shops in the area, approving work remotely or getting free expert advice so you can be confident about any decision.

There’s nothing to pay up-front; you simply only pay for repairs or services that you approve. 

Nope, no funny business here—just get the job done and pay for what you approve. It really is that simple.

With our handy nationwide network of over 26,000 shops to choose from and free sign-up – you can rest assured your car is in good hands. 

With CarAdvise, you don’t need a fleet of 100,000 cars to get an amazing deal on car services. Our discounted prices are guaranteed to beat any other retail options – so why spend more? On average customers save 15-40% when they choose us – that could mean hundreds saved in just one service job.

Learn More

At CarAdvise, we believe life is unpredictable and if you need to reschedule or cancel an appointment – no worries! We promise there’s never any penalty for missed appointments.

We’ve partnered with the best in the industry such as Firestone, Pep Boys, JiffyLube, Canadian Tire, NTB, Meineke, Tire Kingdom, AAMCO, Monro, FCA dealerships and many independent shops across the country.

Ready to join the party? Just a few clicks and you’ll be all set – create your account now. You can easily create your account here.

Just email us at [email protected] or give our friendly team a ring at (844) 923-8473 and we’ll be sure to lend you the helping hand you need.