A Coolant Temperature Sensor Replacement cost in Blaine in 2024

The average cost for an engine coolant temperature sensor replacement with CarAdvise is $191 and the range is generally between $97 and $310.

Get expert advice, compare prices, schedule, approve, & pay for any service at your favorite shops - guaranteed to be lower than in-store retail.

How CarAdvise Works

Book

Find 400+ services from a network of trusted shops and book appointments in seconds.

Approve

Approve or decline an itemized list of services and costs before any work begins.

Pay

Pay securely and enjoy exclusive discounted rates and a hassle-free checkout experience.

AVERAGE COST IN Blaine

A Coolant Temperature Sensor Replacement costs by shop in Blaine.

CarAdvise Customers save an average of $38 on A Coolant Temperature Sensor Replacement.

POPULAR VEHICLES

Average cost of A Coolant Temperature Sensor Replacement for popular vehicle models in Blaine:

Car Model

Avg. cost

$50

Maintenance as it's meant to be.

Transparent

Never overpay for car maintenance. Compare and select from discounted prices across 26,000+ trusted shops nationwide.

Empowering

Ignite your auto knowledge. Gain invaluable insights into maintenance schedules, service clarity, and obtain expert advice.

Hassle-Free

Bypass the stress of negotiations. CarAdvise simplifies your car care journey for an effortless experience.

THE IMPORTANCE OF A Coolant Temperature Sensor Replacement

What is a coolant temperature sensor and how does it work?

The coolant temperature sensor is a component of the engine cooling system. Mounted inside your engine, the device relies on electrical resistance to measure engine temperatures.

Your engine produces a good deal of heat as a byproduct of combustion. Some of that heat is necessary for proper engine function. But too much heat can cause damage. Therefore, liquid coolant (also known as “antifreeze”) is circulated through the engine where it absorbs some of the heat. The coolant flows from the engine to the radiator, where heat dissipates into the atmosphere before traveling back to the engine to pick up more heat.

In order for the cooling system to do its job properly (and for your engine to work as it should), it is essential that the temperature of your engine be monitored constantly. That is the responsibility of the coolant temperature sensor. Mounted inside the engine, the device uses electrical resistance to measure the temperature of the coolant. The information is sent to the engine control module (the ECM) so that the computer can make adjustments to things like engine timing and fuel injector function. The sensor also informs the temperature gauge or engine temperature light on the dashboard.

COMMON SYMPTOMS

How do I know if my engine needs a new coolant temperature sensor?

If the coolant temperature sensor fails in your engine, it will provide inaccurate information to the ECM, the computer that controls engine function. This can cause the engine to consume excess fuel and lead to a drop in fuel efficiency. You might see black and sooty smoke coming from the tailpipe when you accelerate as a result of a rich air/fuel mixture. A bad temperature sensor can also cause the check engine light to come on. A diagnostic scan, in that case, would likely reveal a trouble code related to exhaust and emission problems, fuel delivery faults, or failure of the cooling system. If the coolant temperature sensor is leaking coolant from the engine, overheating might also occur.

This text is only for demo

FREQUENCY OF INSPECTION

How does a technician perform A Coolant Temperature Sensor Replacement ?

To replace a coolant temperature sensor, a technician must first allow your engine to cool considerably to prevent serious injury from scalding hot coolant. Once the engine has cooled for about a half an hour, the technician will relieve pressure in the cooling system. Some of the coolant must typically be drained from the system before the sensor is removed. The coolant temperature sensor is generally located in one of three places - in or near the thermostat housing, in the cylinder head, or in the intake manifold. Once the has been located, its electrical connector is detached. The sensor must then be either unscrewed from its mounting flange or unfastened by removing a retaining clip. Once the old sensor has been extracted from its mount, the area is cleaned of any debris or leaked coolant. The new sensor is installed with thread sealer and torqued to specifications (or seated with a fresh o-ring and clip). The sensor wire is reattached and the coolant is topped off. The cooling system will have to be bled of air, or “burped”, before your vehicle can be placed back into service.

Other Questions Customers Ask

Does the coolant temperature sensor control the fan?
The cooling fans in most modern vehicles are controlled by the engine control module (ECM). The ECM gets its cues from the coolant temperature sensor. If the sensor is faulty, the ECM will not power up the fans when they are needed. Engine overheating and other problems can be the result.
What makes a coolant temperature sensor go bad?
It is possible that a coolant temperature sensor might go bad on its own because of faulty manufacturing. However, most temperature sensors fail because of poor cooling system maintenance. If you do not replace your engine coolant regularly, the anti-corrosion capability of the coolant drops. Corrosion is a common culprit in the shortened lifespan of a coolant temperature sensor.
Can you replace a coolant temperature sensor without draining coolant?
While it is usually not necessary to drain the entire cooling system in order to replace the temperature sensor, it is necessary to remove some of the coolant. But only enough to allow the coolant level to drop below the level of the sensor. Once the sensor has been replaced and the coolant has been topped off, It is also important that the system be bled of any trapped air.

This is demo Question

This is demo Answer

Compare discounted prices at 32k+ shops.

Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.

PepBoys Full SVG
Firestone Name SVG
Jiffy Lube Full SVG
NTB Logo SVG 1
Discount Tire Full SVG
GoodYear Logo Full SVG 1
Valvoline Name SVG
Meineke Name SVG

Trusted & partnered with leading companies.

We've earned a reputation as the go-to choice for quality car care, with some of the biggest names in business reaping the benefits and improving their customer's car care experience.

Honda
doordash
ebay
Allstate
carvana
buckle

Need to talk about something?

Call us at (844) 923-8473 or email [email protected]

Join the world's largest consumer fleet.

Over 1.8 Million already have.