Average cost of Power Steering Pump Replacement for popular vehicle models in Memphis:
Avg. cost $232
Avg. cost $439
Avg. cost $167
THE IMPORTANCE OF Power Steering Pump Replacement
What is a power steering pump and how does it work?
A power steering pump uses hydraulic pressure to make it easier for a driver to turn the steering wheel. Power steering is featured on nearly all vehicles today. Without power-assisted steering, turning the wheel would be very difficult, especially when traveling slowly, when stopped, or while parking. Although the automotive industry is beginning to see many late-model vehicles that feature electric-assist power steering systems, still the majority rely on hydraulic power. The power steering pump is the heart of the system, pressurizing the oil (power steering fluid) to exert force - up to 1000 psi in some vehicles - for steering assist.
How do I know if my power steering pump needs to be replaced?
If your power steering pump is bad or failing, there is a good chance that you will notice symptoms when you are driving. If you notice any of the following, make sure to have your steering system inspected to determine if your pump is bad:
You hear a growling, humming, or whining noise coming from under the hood. This sound will often grow louder when you turn the steering wheel
Your steering wheel becomes abnormally hard to turn
The steering wheel shakes or jerks during turning maneuvers
Upon inspection, you (or a technician) notice metallic particles inside the power steering fluid reservoir
FREQUENCY OF INSPECTION
How does a technician perform Power Steering Pump Replacement ?
If your power steering pump needs to be replaced, a mechanic will typically need to do the following:
Remove the serpentine belt and any components necessary to access the belt
Use a syringe, baster, or pump to extract all of the power steering fluid from the pump reservoir
Disconnect the power steering lines that connect to the pump
Unbolt the pump from its mounting location on the engine block
Remove the old pump and mount the new component
Reconnect the power steering fluid lines
Refill the pump reservoir with fresh fluid
Bleed the air out of the steering system
Test drive your vehicle to verify the repair
OTHER QUESTIONS CUSTOMERS ASK
Is it easy to replace a power steering pump?
The procedure to replace a power steering pump varies a good deal depending on the vehicle make and model. Generally speaking, pump replacement on a transverse-mounted engine (the configuration in front-wheel drive vehicles) is more difficult than on other designs. Because of the pump’s proximity to the vehicle’s frame and inner fender, there is little room for access, and the job often requires more tools.
Can you drive with a broken power steering pump?
If you drive with a bad power steering pump, understand that turning the steering wheel will be significantly harder than it should. It can even be dangerous. Consider what might happen if the power steering pump fails completely when you are turning through an intersection, or trying to avoid a collision. The sudden loss of steering assist can make a maneuver nearly impossible. And if the pump pulley seizes, the serpentine belt will fail and cause other serious issues, such as an overheated engine, a dead battery, and a lack of climate control inside your vehicle.
What can mess up a power steering pump?
A power steering pump can suffer damage if you allow the fluid level to get too low in the reservoir. If the fluid becomes contaminated and is not replaced, damage can occur. And if you turn the steering wheel all the way to one direction, where it is up against the lock (where it stops turning) for a long period of time, you can cause pressure surges that lead to premature pump failure.
What are some other common services related to Power Steering Pump Replacement?
Our digital platform is designed to make maintaining and repairing your vehicle a breeze – from conveniently scheduling services, finding shops in the area, approving work remotely or getting free expert advice so you can be confident about any decision.
How much does CarAdvise cost?
There’s nothing to pay up-front; you simply only pay for repairs or services that you approve.
Are there any additional fees?
Nope, no funny business here—just get the job done and pay for what you approve. It really is that simple.
Are there shops available in my area?
With our handy nationwide network of over 26,000 shops to choose from and free sign-up – you can rest assured your car is in good hands.
How does CarAdvise pricing work?
With CarAdvise, you don’t need a fleet of 100,000 cars to get an amazing deal on car services. Our discounted prices are guaranteed to beat any other retail options – so why spend more? On average customers save 15-40% when they choose us – that could mean hundreds saved in just one service job.
At CarAdvise, we believe life is unpredictable and if you need to reschedule or cancel an appointment – no worries! We promise there’s never any penalty for missed appointments.
What shops do you work with?
We’ve partnered with the best in the industry such as Firestone, Pep Boys, JiffyLube, Canadian Tire, NTB, Meineke, Tire Kingdom, AAMCO, Monro, FCA dealerships and many independent shops across the country.
How do I sign up?
Ready to join the party? Just a few clicks and you’ll be all set – create your account now. You can easily create your account here.
How do I get more help?
Just email us at firstname.lastname@example.org or give our friendly team a ring at (844) 923-8473 and we’ll be sure to lend you the helping hand you need.