A Fan Clutch Replacement cost in Niagara Falls in 2024

The average cost for a radiator fan clutch replacement with CarAdvise is $759 and the range is generally between $133 and $949.

Get expert advice, compare prices, schedule, approve, & pay for any service at your favorite shops - guaranteed to be lower than in-store retail.

How CarAdvise Works

Book

Find 400+ services from a network of trusted shops and book appointments in seconds.

Approve

Approve or decline an itemized list of services and costs before any work begins.

Pay

Pay securely and enjoy exclusive discounted rates and a hassle-free checkout experience.

AVERAGE COST IN Niagara Falls

A Fan Clutch Replacement costs by shop in Niagara Falls.

CarAdvise Customers save an average of $152 on A Fan Clutch Replacement.

POPULAR VEHICLES

Average cost of A Fan Clutch Replacement for popular vehicle models in Niagara Falls:

Car Model

Avg. cost

$50

Maintenance as it's meant to be.

Transparent

Never overpay for car maintenance. Compare and select from discounted prices across 26,000+ trusted shops nationwide.

Empowering

Ignite your auto knowledge. Gain invaluable insights into maintenance schedules, service clarity, and obtain expert advice.

Hassle-Free

Bypass the stress of negotiations. CarAdvise simplifies your car care journey for an effortless experience.

THE IMPORTANCE OF A Fan Clutch Replacement

What is a fan clutch and how does it work?

A fan clutch is a heat-sensitive device that controls the cooling fan on an engine. Most vehicles today rely on an electric cooling fan assembly mounted to the back of the radiator. But older vehicles featured a fan that was mounted to the engine. In between the cooling fan and the engine was a fan clutch that allowed the speed of the fan to match closely with that of the engine.

The goal of a cooling fan clutch is to ensure that the fan only runs when it is needed. An engine should operate within a specific temperature range. The cooling fan, whether on a modern vehicle or older engine, helps to draw air through the radiator and ultimately cool down the engine. When the fan is not needed, a computer module shuts it off (in a modern vehicle) or the fan clutch prevents it from spinning (in an older vehicle).

COMMON SYMPTOMS

How can I tell if my fan clutch needs to be replaced?

If your engine runs below or above normal operating temperatures, the fan clutch could be the culprit. That is because the clutch responds to heat from the engine to speed up or slow down as needed. If the clutch is not responding as it should, it will either cause the engine to cool down too much or overheat.

A fan clutch that seizes up will remain engaged. You might hear a loud roar from underneath the hood as the fan picks up excessive speed. Your engine might feel as though it lacks power. When the engine is off, you might notice that the fan will not turn freely. Conversely, a failing fan might not spin at all - or spin very slowly - when the engine is running.

This text is only for demo

FREQUENCY OF INSPECTION

How does a technician perform A Fan Clutch Replacement ?

To replace a fan clutch, a technician must remove the upper fan shroud for access. Depending on the vehicle make and model, other components might also need to be removed or set out of the way. Once access has been gained to the fan and clutch assembly, the technician will need to do the following:

  • Lock or hold the water pump shaft in place with a special service tool
  • Detach the cooling fan nut from the water pump
  • Remove the fan and clutch assembly from the vehicle
  • On a bench, disconnect the fan from the clutch
  • Bolt the new clutch to the fan and torque to manufacturer’s specifications
  • Install the fan and clutch onto the water pump output shaft
  • Not all fan clutches are attached in the same manner. Some also include an electrical connector that must be removed and reattached.

Other Questions Customers Ask

Do electric cooling fans have clutches?
A modern electric cooling fan does not include a clutch. Electric fans cycle on and off in response to signals sent by the engine control module (ECM). Some older mechanical engine-mounted fans featured a clutch that was controlled electronically by the ECM, but they differed considerably from the electric fan assemblies used in most vehicles today.
Why is an electric fan better than mechanical?
A mechanical fan is driven by the engine. So, the engine bears the mechanical load of the rotating fan. An electric fan assembly is more energy efficient because it does not place a drag on the engine. Instead, the vehicle’s computer tells it when to turn on and off.
At what temperature does a fan clutch engage?
A fan clutch engages at or around 170 degrees Fahrenheit in most cases. When the cooling system no longer requires assistance from the fan, the clutch disengages, usually after a temperature drop of about 20 degrees.

This is demo Question

This is demo Answer

Compare discounted prices at 32k+ shops.

Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.

PepBoys Full SVG
Firestone Name SVG
Jiffy Lube Full SVG
NTB Logo SVG 1
Discount Tire Full SVG
GoodYear Logo Full SVG 1
Valvoline Name SVG
Meineke Name SVG

Trusted & partnered with leading companies.

We've earned a reputation as the go-to choice for quality car care, with some of the biggest names in business reaping the benefits and improving their customer's car care experience.

Honda
doordash
ebay
Allstate
carvana
buckle

Need to talk about something?

Call us at (844) 923-8473 or email [email protected]

Join the world's largest consumer fleet.

Over 1.8 Million already have.