A Valve Cover Replacement cost in Upland in 2024

The average cost for a valve cover with CarAdvise is $352 and the range is generally between $85 and $923.

Get expert advice, find shops, schedule, approve, & pay for any service - guaranteed to be lower than in-store retail price.

Get your vehicle's inside scoop without the mumbo jumbo.

Lower than retail price

Guaranteed or 5% back

We've got your back

12k/12mo Warranty

Peace of mind

14-Day Assurance


A Valve Cover Replacement costs by shop in Upland.

CarAdvise Customers save an average of $70 on A Valve Cover Replacement.


Average cost of A Valve Cover Replacement for popular vehicle models in Upland:

Car Model

Avg. cost


THE IMPORTANCE OF A Valve Cover Replacement

What is a valve cover and how does it work?

A valve cover is a protective cover that allows the engine valves to operate in a clean environment and prevents oil from escaping the engine.

Internal combustion engines such as the one found in most passenger vehicles rely on a set of pistons that pedal a crankshaft the way your legs might pedal a bicycle. The pistons move in response to rapidly expanding gases in their respective cylinders as a result of the combustion process. Each cylinder is sealed air tight so that pressure can build up inside. So, a series of valves at the top of the engine open and close in order to allow air and fuel to enter the cylinders and exhaust gases to escape.

The valve cover allows engine oil to work around the valves and other parts of the valve train without spraying all over the engine compartment and without contaminants entering the engine. Depending on the number of cylinders in your engine, there might be one or two valve covers.


How do I know if my engine needs a new valve cover?

Problems with a valve cover usually stem from a bad valve cover gasket, the seal between the valve cover and the intake manifold of the engine. That said, a valve cover is made of metal or plastic and can become damaged from overheating, overtightening, frequent changes in temperature, lack of use, or contamination. You might suspect that a valve cover is bad if you notice one or more of the following signs:

Oil leaks from around the edges of the valve cover

Cracks appear in the valve cover

The oil level is low in your engine

You smell the odor of burning oil

This text is only for demo


How does a technician perform A Valve Cover Replacement ?

The valve cover(s) is located at the top of your engine. To replace the component, a technician will first need to remove the upper engine cover and any other shields, guards, cables, or other components that are in the way (including electrical, mechanical, and emission control parts). On larger engines with six or eight cylinders that have multiple valve covers, the intake plenum might also need to be removed (depending on which valve cover is bad).

With all components out of the way, the valve cover retaining bolts securing it to the intake manifold are removed and the valve cover is carefully dislodged from the engine. Old sealant material, whether a liquid type or a gasket (or both) must be removed from the mounting surface of the intake manifold. The technician might also check the mounting flange to make sure it is straight and undamaged.

Once the intake manifold has been prepped, a new gasket (or sealant) is put in place. The new valve cover is inserted and the retaining bolts are installed and torqued to manufacturer’s specifications. Finally, the engine is turned on and checked for oil leaks.


What happens if you don't replace valve covers?
The main concern related to a bad valve cover or valve cover gasket is an engine oil leak. Of course, contamination of the oil is also a problem, but if your engine does not have enough oil at all times, your engine could suffer premature internal wear and damage. The oil that is left is also prone to premature thermal breakdown and contamination.
Is a valve cover gasket leak serious?
Yes. A valve cover leak, while not serious in the same immediate sense that worn out brake pads or a power steering pump leak might be, can cause your engine to run low on oil. Not only does that cause a mess inside the engine compartment, but it also leads to premature wear to the engine’s internal components, thermal breakdown of the oil, and even engine overheating.
Is a valve cover easy to fix?
Removing and replacing a valve cover, especially on some engines, is not particularly difficult in and of itself. There are a dozen or so bolts securing the valve cover to the intake manifold and a gasket sealing the space between the two. Although care must be exercised when separating the cover from the manifold, and manufacturer’s specifications must be followed when torquing the fasteners upon reassembly, the hardest part of valve cover replacement is often getting to the component in the first place.

This is demo Question

This is demo Answer

Compare discounted prices upfront at over 26,000 shops nationwide.

Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.

+ More

Join the world's largest consumer fleet.

Over 1.5 Million already have.