A Blower Motor Replacement costs by shop in Brooklyn Park.
CarAdvise Customers save an average of $51 on A Blower Motor Replacement.
Average cost of A Blower Motor Replacement for popular vehicle models in Brooklyn Park:
Avg. cost $247
Avg. cost $338
Avg. cost $227
THE IMPORTANCE OF A Blower Motor Replacement
What is a blower motor and how does it work?
The blower motor is part of your vehicle’s heating, ventilation, and air conditioning (HVAC) system. The blower is an electrical fan assembly mounted in the HVAC ducts below the dashboard ahead of the glove box.
Whenever you operate the vent, heat, or air conditioner, the blower motor forces air through the vents at one of a number of speed settings. When you select a fan speed, a resistor in the electrical pathway of the blower motor alters the amount of electrical current flowing to the blower motor in response to your selection.
In combination with another device, the blend door, the blower motor is able to bring air of different temperatures into the cabin. When you choose the heat setting, the blower motor sends air across the hot heater core in the system. If you choose cool air from the air conditioner, the blend door changes the path of the air flow and allows it to pass over the cold evaporator instead.
How do I know if my vehicle needs the blower motor replaced?
When a blower motor fails, one of two problems occur. In one case, the air coming from the vents, warm or cool, does not come out with any force. The heater might still work, and the air conditioner might still cool, but the pressure from the vents is significantly reduced. Regardless of what fan speed setting you select, the air simply does not blow from the vents. In this case, the fan motor might be faulty.
In the other case, the fan refuses to work on one or more of its speed settings. For instance, it might blow when you select the highest speed setting, but not on lower settings. This would indicate that the resistor might be bad.
Problems with air flow can also point to other issues, such as a bad relay, blown fuse, or even a clogged cabin air filter.
This text is only for demo
FREQUENCY OF INSPECTION
How does a technician perform A Blower Motor Replacement ?
Due to its location underneath the dashboard and ahead of the glove box, it is necessary for a technician to access the inside of your vehicle for blower motor replacement. The glove box must be removed and lower dash components disassembled. From there, a technician will take the following general steps to remove the blower motor housing and replace the blower motor:
Unplug the wires connected to the blower motor housing
Remove the fasteners that hold the blower motor housing in place
Extract the housing from the HVAC system
Remove the blower motor from the housing and insert the new motor
Reinstall the housing and plug in the electrical wires
Reinstall the dashboard components and glove box
The blower motors in some vehicles are mounted in other locations, such as ahead of the center console. Some require a significant amount of disassembly to access it and several hours to complete the service. And some older vehicles place the blower motor in the engine compartment.
OTHER QUESTIONS CUSTOMERS ASK
How do I know if I need to replace the blower motor or the blower motor resistor?
One way to tell that the blower motor resistor is faulty (rather than the blower motor itself) is when the fan runs on some speed settings but not on others. If the blower motor fails, it will usually fail to function at all, whereas a bad resistor is often intermittent or partially impaired.
Why does the fan in my car only work on high?
The blower motor resistor changes the amount of electrical current that flows to the blower motor. “High” speed is the normal amount of current, and the lower speeds are due to designated degrees of electrical resistance. If the resistor fails, it is possible for the electrical signal to bypass the resistor in its normal “high” state. This results in a fan speed that only runs on high and is unresponsive to other settings.
What causes blower motor relay failure?
Blower motor relay failure is usually caused by one of three things: overheating, corrosion (which can lead to overheating), and too much current coming from a bad blower motor (which can also cause overheating). In each case, the resistor can seize up inside and fail to respond to input from the control circuit.
This is demo Question
This is demo Answer
Compare discounted prices upfront at over 26,000 shops nationwide.
Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.
Our digital platform is designed to make maintaining and repairing your vehicle a breeze – from conveniently scheduling services, finding shops in the area, approving work remotely or getting free expert advice so you can be confident about any decision.
How much does CarAdvise cost?
There’s nothing to pay up-front; you simply only pay for repairs or services that you approve.
Are there any additional fees?
Nope, no funny business here—just get the job done and pay for what you approve. It really is that simple.
Are there shops available in my area?
With our handy nationwide network of over 26,000 shops to choose from and free sign-up – you can rest assured your car is in good hands.
How does CarAdvise pricing work?
With CarAdvise, you don’t need a fleet of 100,000 cars to get an amazing deal on car services. Our discounted prices are guaranteed to beat any other retail options – so why spend more? On average customers save 15-40% when they choose us – that could mean hundreds saved in just one service job.
At CarAdvise, we believe life is unpredictable and if you need to reschedule or cancel an appointment – no worries! We promise there’s never any penalty for missed appointments.
What shops do you work with?
We’ve partnered with the best in the industry such as Firestone, Pep Boys, JiffyLube, Canadian Tire, NTB, Meineke, Tire Kingdom, AAMCO, Monro, FCA dealerships and many independent shops across the country.
How do I sign up?
Ready to join the party? Just a few clicks and you’ll be all set – create your account now. You can easily create your account here.
How do I get more help?
Just email us at [email protected] or give our friendly team a ring at (844) 923-8473 and we’ll be sure to lend you the helping hand you need.