An Outer Tie Rod End Replacement costs by shop in Salt Lake City.
CarAdvise Customers save an average of $34 on An Outer Tie Rod End Replacement.
Average cost of An Outer Tie Rod End Replacement for popular vehicle models in Salt Lake City:
Dodge Grand Caravan
Avg. cost $187
Avg. cost $169
Chevrolet Silverado 1500
Avg. cost $238
THE IMPORTANCE OF An Outer Tie Rod End Replacement
What is a tie rod end and how does it work?
A tie rod end (sometimes referred to as an “outer tie rod end”) is a component of the steering system in a vehicle.
Your vehicle comes equipped with either a traditional steering gear box or a rack and pinion (a more common type of gearbox used on late model passenger vehicles) that is designed to transfer the movement of the steering wheel to the actual wheels on the ground.
When you turn the steering wheel, you are actually turning a shaft that reaches through the vehicle body. The steering shaft moves gears in the gearbox or the “steering rack” that, in turn, actuate a set of metal rods, the “tie rods”, to the left or right. A tie rod end is screwed onto the outermost part of each tie rod and connects the tie rod to the steering knuckle to which the wheel hub and wheel are bolted.
At the point at which a tie rod end connects to the steering knuckle is a ball-and-socket joint that accommodates the movement of the steering and suspension systems. Where it attaches to the tie rod, it is screwed on, making it adjustable so that a technician can adjust and align the wheels and tires.
How do I know if my vehicle needs a new tie rod end?
Tie rods are susceptible to bending when a vehicle suffers an impact, such as with a pothole or a curb. Tie rod ends, on the other hand, are pretty sturdy and less prone to bending. The ball-and-socket joint on the tie rod end, however, is prone to damage and wear. If the protective rubber boot on the joint is cracked or ruptured, the grease that lubricates the joint can leak out or allow dirt and debris to enter. This leads to premature wear. A loose or broken joint in the tie rod end can result. When this happens, you might notice one or more of the following symptoms:
A clunking noise, especially when turning
Rough feel in the steering wheel when turning
Excess play in the steering wheel
Vibration while driving
This text is only for demo
FREQUENCY OF INSPECTION
How does a technician perform An Outer Tie Rod End Replacement ?
It is common for a technician to replace both the left and right tie rod ends as a pair. In fact, it is generally recommended to do so. To replace a tie rod end, a technician must first raise and support your vehicle in the air for access. With the tire and wheel removed, the technician will carefully mark the location of the tie rod end on the tie rod (the length of the tie rod) so that the new component can be installed in the same position as the old one. From there, a technician will perform the following steps:
Loosen the lock nut on the tie rod
Remove the cotter pin from the tie rod end ball stud (if applicable)
Remove the castle nut or other retaining nut
Using a special tool, separate the tie rod end ball joint from the steering knuckle
Unthread the tie rod end from the tie rod
Screw the new tie rod end onto the tie rod
Reattach the tie rod end to the steering knuckle and torque to manufacturer’s specification
Insert grease into the tie rod end ball joint (if applicable)
Snug up the lock nut
Replace the wheel(s) and tire(s)
Perform a wheel alignment (in most cases)
OTHER QUESTIONS CUSTOMERS ASK
Can you replace just one outer tie rod end?
While it is technically possible to replace a single tie rod end on a vehicle, it is not generally recommended. A common failure of a tie rod end is a worn out ball-and-socket joint, often caused by a lack of lubrication (leaking protective boot) or dirt in the joint. Since worn or damaged tie rod ends can lead to premature tire tread wear and a misaligned steering and suspension system, (or worse, a failed component and loss of steering), both sides should be replaced at the same time.
Can you drive with a broken outer tie rod end?
No. If an outer tie rod end is worn, it might be possible to drive your vehicle for a while. But then there is no telling when it will fail completely. If it is broken, you will be unable to steer your vehicle. The affected wheel and tire will not respond to the steering wheel. The same thing happens if a tie rod end breaks while you are driving.
Can a pothole damage the tie rod ends?
It is more common for the tie rod to become bent when you drive through a pothole than it is for the tie rod end to fail. In some cases, however, a bad run-in with a pothole can damage the ball-and-socket joint of the tie rod end and cause it to fail.
This is demo Question
This is demo Answer
Compare discounted prices upfront at over 26,000 shops nationwide.
Finding a trusted shop has never been easier. We've partnered with the largest brands in auto maintenance to give our customers the biggest network to choose from.
Our digital platform is designed to make maintaining and repairing your vehicle a breeze – from conveniently scheduling services, finding shops in the area, approving work remotely or getting free expert advice so you can be confident about any decision.
How much does CarAdvise cost?
There’s nothing to pay up-front; you simply only pay for repairs or services that you approve.
Are there any additional fees?
Nope, no funny business here—just get the job done and pay for what you approve. It really is that simple.
Are there shops available in my area?
With our handy nationwide network of over 26,000 shops to choose from and free sign-up – you can rest assured your car is in good hands.
How does CarAdvise pricing work?
With CarAdvise, you don’t need a fleet of 100,000 cars to get an amazing deal on car services. Our discounted prices are guaranteed to beat any other retail options – so why spend more? On average customers save 15-40% when they choose us – that could mean hundreds saved in just one service job.
At CarAdvise, we believe life is unpredictable and if you need to reschedule or cancel an appointment – no worries! We promise there’s never any penalty for missed appointments.
What shops do you work with?
We’ve partnered with the best in the industry such as Firestone, Pep Boys, JiffyLube, Canadian Tire, NTB, Meineke, Tire Kingdom, AAMCO, Monro, FCA dealerships and many independent shops across the country.
How do I sign up?
Ready to join the party? Just a few clicks and you’ll be all set – create your account now. You can easily create your account here.
How do I get more help?
Just email us at [email protected] or give our friendly team a ring at (844) 923-8473 and we’ll be sure to lend you the helping hand you need.